Archive for the ‘Heat Pumps’ Category
Wednesday, April 25th, 2012
Ceiling fans really help people reduce their heating and cooling cost. They have the ability to reduce warm temperatures up to 7 degrees, while dramatically reducing air conditioning costs. During the winter months, ceiling fans can operate in reverse mode. Doing so will circulate warm air throughout the room by pushing it up toward the ceiling. Careful consideration should be given when buying a ceiling fan, because of the wide variety available.
Fan Size
The fan should not be too large or too small for your room. A rule of thumb is to have at least 7 feet of clearance from the floor to the fan. The blades and the nearest wall should be a minimum of two feet apart.
Fan Motors
For ceiling fans to operate with efficiency, the size of the motor and the ground motor windings must coincide with blade length. This will allow the fan to run without using a lot of energy and continuously without any problems. However, when the blades or motor are not balanced correctly, the fan will begin to vibrate even at lower speeds. The motors that come with outdoor fans are built to endure temperature changes and moisture.
Fan Blades
Fan blades come in a variety of sizes and shapes. Appearance however is secondary to choosing ones that will provide the best performance and stability. You also need to decide what blade pitch you want. A higher pitch equals greater air circulation at lower speeds. Blade pitches are available between 8 and 15 degrees.
Another thing to consider is fan mounts. There are three types: flush mount, down rod mount, and tri-mount. Down rods are suited for higher ceilings, flush mount is designed for lower ceilings, and the tri-mount provides the best circulation regardless of height.
For more helpful hints check us out on www.southairinc.com
Tags: Acworth, Air Conditioning, Alpharetta, Atlanta, Austell, Canton, Cartersville, Cherokee County, Cumberland, Dallas, East Cobb, Euharlee, Fulton County, Geothermal, Holly Springs, HVAC, Indoor Air Quality, Kennesaw, Kingston, Lost Mountain, Mableton, Marietta, Mars Hill, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Air Conditioning, Energy Savings, Gas Heaters, Geothermal, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Indoor Air Quality, Insulation, Maintenance Plan/Comfort Club | Comments Off
Sunday, December 18th, 2011
Are you looking for a job that will be around in the future? Consider the HVAC industry. People will always be living in homes and homes will always need to be heated in the winter and in the Atlanta area, cooled in the summer. Below are some compelling reasons to consider a career in the heating and air conditioning field.
The current demand for HVAC (heating, ventilation, and air conditioning) specialists has been growing over the past couple of years and is expected to continue to grow for the next several years. This is according to current U.S. Bureau of Labor Statistics (or BLS stats).
Current industry trends indicate a future growth rate of nearly 28% nationwide – this trend is predicted to continue until 2018, a total period of researching and studying 10-year industry trends beginning in 2008. Studies have revealed that once the results of that research and those studies are complete, there will be nearly 395,000 individuals who make their living in the HVAC industry, and choose to make this their lifelong career.
Ironically, there are those who feel that the HVAC industry is not recession-proof. Whether or not this is true, we can tell you that there are no statistics of current career trends in the HVAC industry that prove this. So, saying that the HVAC industry is recession-proof or not is purely speculative. However, on a more positive note, here is why the demand for top notch HVAC techs is going to be worth looking into:
Going Green – Numerous HVAC companies have put their efforts into green technology. Many technicians are educated in energy-efficient systems because the industry demands that they keep up with HVAC market and technological trends.
Maintenance and repair – Even if you do not need to replace your current HVAC system, it will always need preventative maintenance and repairs. Just like electricity, natural gas, and water, air conditioning and heating is something that no homeowner or business owner wants to do without.
Replacing your system – Even well-maintained heating and cooling systems eventually need replacing, considering the average lifespan of a HVAC system is 10 to 12 years. This is the case whether the economy is good or bad.
Upgrading older systems – Most home and business owners realize that maintaining HVAC systems involves keeping up with energy efficiency and technology. By upgrading or replacing your current system, you will save money on your monthly utility bills.
Here is another great reason to consider a career in the HVAC industry. When you are a certified HVAC tech, you can earn from $40,000 to over $100,000 per year in the metro Atlanta area!
Tags: Acworth, Air Filtration, Alpharetta, Austell, Bridgemill, Canton, Cartersville, Cherokee County, Cobb County, Dallas, Marietta, Powder Springs, Roswell, Townlake
Posted in About Us, Air Conditioning, Energy Savings, Heat Pumps, Heating, Home Savings, Maintenance Plan/Comfort Club, Tax Credits, Trane | Comments Off
Tuesday, December 6th, 2011
Are you looking for inexpensive ways to save money on energy bills this winter? Now is a great time to tackle these home projects and each of them is very affordable.
1. Add weather stripping to your doors and windows. Keeping warm air from escaping and drafts from blowing in can make a 5% to 10% difference in your energy use.
2. Seal exposed ductwork in attics and basements. Check for gaps in seams and joints, holes, or other places where warm air can escape. Use high quality mastic, rather then silver or duct tape that won’t hold as well or be efficient. Experts say that as much as 20% of warm air can escape through leaky ducts, so this is a great way to save money!
3. Put an insulation blanket on your water heater. The water tank warms up 30 or 40 gallons of water and then it starts to cool off, wasting money. An insulating blanket will slow down the heat loss substantially.
4. Program your thermostat so that the system runs less when you are nott there. Let the temperature fall 10 degrees or so when the house is empty, and you can program it to warm back up before you get home
5. Run full loads of laundry instead of several small loads. You’ll reduce your water use and your overall electrical use.
6. Add insulation to the attic. In winter, heated air escapes through the ceiling into the attic and out of the house. In summer, the attic gets hot and that air pushes down into the house, causing the air conditioner to work harder. A layer of insulation (minimum R19) in the attic will help year-round.
7. Have your furnace or heat pump cleaned and tuned up for winter. A dirty furnace or heat pump coil can waste 20% or more of the energy it uses. Having your entire HVAC system serviced before winter is a cost that might pay you back very quickly.
These are very good ways to reduce energy use on a limited budget. They are easy to accomplish and you will notice immediate results — lower energy bills every month going forward!
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Insulation, Maintenance Plan/Comfort Club, Rebates & Tax Credits, Tax Credits, Trane, Winterizing | Comments Off
Friday, November 18th, 2011
Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems
Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.
Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.
Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Waleska, White, Woodstock
Posted in Gas Heaters, Heat Pumps, Maintenance Plan/Comfort Club, Trane | Comments Off
Wednesday, April 20th, 2011
Once you’ve decided that a heat pump really is the best option for your home, you’ll still have a lot of options to consider. There are actually quite a few types of heat pumps and they can vary considerably in terms of their energy efficiency and other available features.
For instance, you can choose to go with a heat pump with a one-speed, two-speed or multi-speed compressor. Single speed compressors are only capable of operating at full capacity. That means that they’ll certainly be able to keep your home warm, but they may be working harder than they need to at some points.
A two-speed or multi-speed compressor, on the other hand, can be adjusted to more appropriately fit the heating and cooling needs of the moment. There will certainly be times when you don’t need your heat pump to be going all out, and the ability to regulate this level of performance can benefit you in several ways.
It will allow you to maintain a more consistent indoor temperature to be sure, but it will also reduce the overall wear and tear on your heat pump over time. If your heat pump doesn’t have to run all out all of the time, it simply won’t wear out as fast, and that will save you both money and frustration in the long run. It’s also worth noting that heat pumps with two-speed or multi-speed compressors are more easily integrated into a zone control system if you have one in your home.
However, regardless of what type of compressor your heat pump has, you’ll also have to examine the various heat pump models available to determine what their actual energy efficiency ratings are. Each heat pump actually comes with two ratings, one for heating and one for cooling.
The heating season performance factor (HSPF) reflects the heat pump’s heating efficiency, while the seasonal energy efficiency ratio (SEER) is a measure of its cooling efficiency. The higher both of these numbers are, the higher the efficiency of the unit. But you don’t necessarily need both numbers to be as high as possible to get the best heat pump for your home.
If you’re going to be using the heat pump more for cooling than for heating because of the climate where you live, you’ll want to make sure the unit you get has as high a SEER as possible, but you won’t have to worry too much about the HSPF. But if you’re going to need more heating than cooling, you should pay more attention to the HSPF than the SEER.
Tags: Sandy Springs
Posted in Heat Pumps | Comments Off
Monday, April 18th, 2011
On the whole, heat pumps are efficient, durable and effective. They are built to run all year round without needing any more maintenance than your average furnace or air conditioning system and they have an average lifespan comparable to those other types of home comfort systems as well.
That’s not to say that there aren’t things you can do to keep your heat pump in good working order, however. Keeping up with the professional maintenance visits is an important step to take along these lines to be sure, but there are also some other things you can do on your own as well to help ensure the continued efficiency and health of your heat pump system.
Proper filter care is an important part of keeping your heat pump working the way it should. If you don’t have a heat pump yet but are thinking of getting one, make sure you have the installation technician show you where the filter is located and how to replace it.
If your system’s already been in place for some time, you can still find out how to care for the filter from your annual maintenance technician or you can probably even find it on your own by taking a close look at your heat pump. The filters are meant to be removed on a regular basis so they’re typically not hard to get to. However, you should always be sure that all of the power to your heat pump is turned off before you open it up to try and find, replace or clean the filter.
Most heat pump filters are meant to be changed or cleaned about once every 90 days or so. However, the specific requirements for each system can vary considerably, so you should be sure to find out what is recommended for the model of heat pump that you have.
Also, you’ll want to know what type of filter you have so that you can purchase the appropriate replacement. The model number for each filter should be clearly printed on it, so simply slide your current filter out and make note of the number so that you can purchase the correct type as a replacement.
Most heat pumps have replaceable filters, but some still do have permanent filters that are meant to be cleaned and then returned to service. If you have one of these types of filters, be sure to read the instructions for cleaning carefully before proceding.
Tags: Kingston
Posted in Heat Pumps | Comments Off
Friday, April 15th, 2011
Whenever you’re looking into replacing your old home heating system or installing a new one, there are many different factors you’ll have to take into consideration. The amount of noise that the system you choose will make is certainly one of these. And in addition to the amount of noise that this system will make, you’ll also want to make a note of where the unit will be placed and so where the noise will be coming from.
While you may have had to worry a bit about the noise generated by heat pumps in the past, it’s not something you’ll have to take into consideration this time around. That’s because newer heat pumps are designed to be quieter than ever, providing the same heating and cooling power with only a fraction of the noise of some earlier models.
In fact, the only part of a heat pump that really makes any noise at all is the outdoor unit. Unless this needs to be located very close to your home or to a window of a room that you use often, chances are that you won’t even hear it at all.
However, if you live very close to your neighbors or don’t have a lot of outdoor space, you may have to put the outdoor unit close to the walls of your home. Even then, though, you’ll hardly notice the noise your heat pump makes. Years of research and redesigning have produced some of the quietest heat pumps yet and that’s what you’ll be buying if you’re in the market for one of these systems now.
Newer heat pumps have been tweaked and adjusted to minimize the amount of noise-generating vibrations they produce. In fact, you’ll probably find that most of these units make no more noise than your refrigerator. They’re efficient and quiet and can keep your home comfortable all year long.
Tags: Waleska
Posted in Heat Pumps | Comments Off
Join Us Online