Posts Tagged ‘Bridgemill’
Tuesday, July 3rd, 2012
By SFLCAuthor
According to ENERGY STAR®, the ideal indoor humidity level is between 30 and 50 percent. In addition to just making you uncomfortable, high humidity levels can pose a threat to your home’s structure and surfaces. Help clear the air with these tips for reducing and controlling humidity at home.
Why Home Humidity Matters
Managing indoor humidity levels can:
• Improve personal comfort.
• Control moisture that can damage your home’s wood, paint and siding.
• Prevent mildew growth and odors in clothing and belongings.
• Improve indoor air quality by reducing dust mites, mold and other allergens.
• Reduce pest infestations.
• Improve the energy efficiency of your air conditioner.
How to Help Reduce and Control Humidity
Some Southern homeowners use their air conditioners year-round to combat humidity. Theo Etzel, CEO of Conditioned Air Corporation of Naples, Inc. in Naples, Florida, has these recommendations for more effective continuous use of your cooling system:
• Set the fan to automatic. (Keeping it in the “on” position actually re-humidifies the space by blowing air over a wet coil when the condenser cycles off.)
• Invest in a unit with a variable-speed air handler.
• Consider installing a whole-house dehumidifier.
• Don’t automatically lower the thermostat. Etzel says turning down the thermostat to reduce humidity can actually be a sign of an oversized air conditioning system.
Ways to Help Cut Excess Humidity
Etzel notes that air-conditioning systems can only keep up with the moisture they’re designed to remove, whether the systems condition fresh incoming air, recirculating interior air, or both.
Here are ways to help keep additional moisture and humidity from infiltrating the home:
• Vent clothes dryers to the outdoors.
• Install vent fans in kitchens and bathrooms.
• Run a dehumidifier.
• Cover dirt floors in crawl spaces with a plastic vapor barrier.
• Seal air and duct leaks.
• Select houseplants that absorb moisture from the air, such as Boston ferns.
• Keep air-conditioning drip pans and drain lines clean and unobstructed.
• Avoid activities that add moisture to the air on humid days, such as taking hot showers and boiling water on the stove.
• Take measures outside. ENERGY STAR suggests keeping gutters and downspouts clean, extending downspouts further from the house, watering plants only when needed and sloping soil away from foundations to keep water from pooling.
The information in this article was obtained from various sources. While we believe it to be reliable and accurate, we do not warrant the accuracy or reliability of the information. These suggestions are not a complete list of every loss control measure. The information is not intended to replace manuals or instructions provided by the manufacturer or the advice of a qualified professional. We assume no liability in connection with the information nor the suggestions made.
Tags: Acworth, Air Conditioning, Air Filtration, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Cumberland, Dallas, East Cobb, Euharlee, HVAC, Indoor Air Quality, Kennesaw, Kingston, Lost Mountain, Mableton, Marietta, Mars Hill, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Services | Comments Off
Sunday, December 18th, 2011
Are you looking for a job that will be around in the future? Consider the HVAC industry. People will always be living in homes and homes will always need to be heated in the winter and in the Atlanta area, cooled in the summer. Below are some compelling reasons to consider a career in the heating and air conditioning field.
The current demand for HVAC (heating, ventilation, and air conditioning) specialists has been growing over the past couple of years and is expected to continue to grow for the next several years. This is according to current U.S. Bureau of Labor Statistics (or BLS stats).
Current industry trends indicate a future growth rate of nearly 28% nationwide – this trend is predicted to continue until 2018, a total period of researching and studying 10-year industry trends beginning in 2008. Studies have revealed that once the results of that research and those studies are complete, there will be nearly 395,000 individuals who make their living in the HVAC industry, and choose to make this their lifelong career.
Ironically, there are those who feel that the HVAC industry is not recession-proof. Whether or not this is true, we can tell you that there are no statistics of current career trends in the HVAC industry that prove this. So, saying that the HVAC industry is recession-proof or not is purely speculative. However, on a more positive note, here is why the demand for top notch HVAC techs is going to be worth looking into:
Going Green – Numerous HVAC companies have put their efforts into green technology. Many technicians are educated in energy-efficient systems because the industry demands that they keep up with HVAC market and technological trends.
Maintenance and repair – Even if you do not need to replace your current HVAC system, it will always need preventative maintenance and repairs. Just like electricity, natural gas, and water, air conditioning and heating is something that no homeowner or business owner wants to do without.
Replacing your system – Even well-maintained heating and cooling systems eventually need replacing, considering the average lifespan of a HVAC system is 10 to 12 years. This is the case whether the economy is good or bad.
Upgrading older systems – Most home and business owners realize that maintaining HVAC systems involves keeping up with energy efficiency and technology. By upgrading or replacing your current system, you will save money on your monthly utility bills.
Here is another great reason to consider a career in the HVAC industry. When you are a certified HVAC tech, you can earn from $40,000 to over $100,000 per year in the metro Atlanta area!
Tags: Acworth, Air Filtration, Alpharetta, Austell, Bridgemill, Canton, Cartersville, Cherokee County, Cobb County, Dallas, Marietta, Powder Springs, Roswell, Townlake
Posted in Services | Comments Off
Tuesday, December 6th, 2011
Are you looking for inexpensive ways to save money on energy bills this winter? Now is a great time to tackle these home projects and each of them is very affordable.
1. Add weather stripping to your doors and windows. Keeping warm air from escaping and drafts from blowing in can make a 5% to 10% difference in your energy use.
2. Seal exposed ductwork in attics and basements. Check for gaps in seams and joints, holes, or other places where warm air can escape. Use high quality mastic, rather then silver or duct tape that won’t hold as well or be efficient. Experts say that as much as 20% of warm air can escape through leaky ducts, so this is a great way to save money!
3. Put an insulation blanket on your water heater. The water tank warms up 30 or 40 gallons of water and then it starts to cool off, wasting money. An insulating blanket will slow down the heat loss substantially.
4. Program your thermostat so that the system runs less when you are nott there. Let the temperature fall 10 degrees or so when the house is empty, and you can program it to warm back up before you get home
5. Run full loads of laundry instead of several small loads. You’ll reduce your water use and your overall electrical use.
6. Add insulation to the attic. In winter, heated air escapes through the ceiling into the attic and out of the house. In summer, the attic gets hot and that air pushes down into the house, causing the air conditioner to work harder. A layer of insulation (minimum R19) in the attic will help year-round.
7. Have your furnace or heat pump cleaned and tuned up for winter. A dirty furnace or heat pump coil can waste 20% or more of the energy it uses. Having your entire HVAC system serviced before winter is a cost that might pay you back very quickly.
These are very good ways to reduce energy use on a limited budget. They are easy to accomplish and you will notice immediate results — lower energy bills every month going forward!
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Services | Comments Off
Wednesday, November 30th, 2011
Winter is coming fast, and it certainly doesn’t let us forget it! Blustery winds that chill through to your bones, iced up car windows, and snow days, this often means that the temperature outside has reached as low as 30 degrees or colder when wind chill is considered!
A large reason that we are able to live comfortably in this weather is because of a special appliance that is often tucked away in your house and not really considered on a daily basis: your furnace.
Furnaces consist of three major components: the burners, a draft inducer, and a heat exchanger. When you bump up your thermostat or it detects that the temperature of your house/building has dropped below its designated temperature, it send a signal to the furnace to ignite its burners.
After the burners are ignited, the draft inducer kicks into action, and sucks the hot gases from the burners towards the heat exchanger. A draft inducer looks similar to a cars turbocharger, and works in a similar manner also. While the hot gas is moved through the heat exchanger, the furnace also brings air from your house through the heat exchanger in order to warm it. If the draft inducer is dirty in any way, this could cause the unit from igniting or staying lit.
And there you have it! Now you understand the basics of how a furnace works. Always use a professional to carry out maintenance and repairs to keep it running at peak efficiency and safe for the whole family.
Tags: Acworth, Alpharetta, Atlanta, Austell, Big Creek, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Cobb County, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, White, Woodstock
Posted in Services, Uncategorized | Comments Off
Friday, November 18th, 2011
Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems
Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.
Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.
Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Waleska, White, Woodstock
Posted in Services | Comments Off
Friday, November 11th, 2011
What is carbon monoxide?
Carbon monoxide (CO) is an odorless, colorless, but dangerous gas. It is produced when a fuel such as natural gas, oil, kerosene, wood or charcoal is burned. Exposure to CO reduces the blood’s ability to carry oxygen. Fuel-burning appliances used indoors must be maintained, used properly and fully vented to the outdoors to prevent dangerous levels of CO. Hundreds of people die accidentally every year from CO poisoning caused by malfunctioning or improperly used fuel-burning appliances.
What are the health effects of carbon monoxide?
Once inhaled, CO attaches to the hemoglobin in the red blood cells. Hemoglobin normally carries oxygen throughout the body. When CO attaches, it blocks the oxygen the body must have, creating a wide range of health problems.
Breathing low levels of CO can cause:
- Headache
- Nausea
- Dizziness
- Weakness
- Confusion
- Disorientation1
Many of these symptoms are similar to the flu, food poisoning or other illnesses. So you may not suspect CO poisoning. If symptoms persist, and especially if they get better after you leave the building, CO may be the cause.
Breathing higher levels of CO causes flu-like symptoms such as headaches, dizziness and weakness in healthy people.
Breathing high levels of CO also can cause:
- Sleepiness
- Nausea
- Anxiety or depression
- Vomiting
- Confusion
- Impaired vision
- Impaired coordination
- Disorientation2
Breathing CO at low levels regularly may cause permanent mental or physical problems. At very high levels, it causes loss of consciousness and death.2
Approximately 450 people die each year from CO exposure related to fuel-burning, residential appliances. Thousands more became ill or sought medical attention.3 CO poisoning is estimated to cause more than 50,000 emergency room visits in the United States each year.2
How can you protect yourself from carbon monoxide?
Make sure stoves or other devices that burn fuel indoors are fully vented to the outdoors. Have a professional check them once a year to be sure they are running well.
Sources include:
- Gas appliances (furnaces, ranges, ovens, water heaters, clothes dryers, etc.)
- Fireplaces, wood stoves
- Coal or oil furnaces
- Space heaters or oil or kerosene heaters
- Charcoal grills, camp stoves
- Gas-powered lawn mowers and power tools
- Automobile exhaust fumes
The following simple steps can prevent CO poisoning:
- Make sure appliances are installed and working according to manufacturers’ instructions and local building codes.
- Never use unvented appliances — make sure all appliances are fully vented to the outdoors.
- Have the heating system, chimney and flue inspected and cleaned by a qualified technician every year.
- Do not use ovens and gas ranges to heat your home.
- Do not burn charcoal, kerosene lanterns or portable camp stoves inside a home, cabin, recreational vehicle or camper.
- Do not operate gasoline-powered engines in confined areas such as garages or basements.
- Never leave your car or mower running in a closed garage.
- Make sure your furnace has an adequate intake of outside air.
- Install a CO detector with an audible alarm in your home and garage.
- Cigarettes, pipes and cigars also produce carbon monoxide. Do not let anyone smoke inside your home.
After an emergency or power outage, be sure to remember these steps so you don’t risk your family’s health. Too many people are poisoned by CO after bad weather emergencies, like snowstorms and hurricanes. You may need to seek shelter elsewhere until the electricity is back.
Should I buy a carbon monoxide detector?
Tags: Acworth, Air Filtration, Atlanta, Austell, Bridgemill, Cherokee County, Dallas, Indoor Air Quality, Kennesaw, Marietta, Paulding County, Woodstock
Posted in Services | Comments Off
Monday, September 5th, 2011
If you’ve recently started researching a new air conditioner for your Taylorsville home, you may have run across “R410A” – a newer form of refrigerant increasingly being used in high end air conditioning equipment. What is R410A and why is it different from the existing refrigerant most air conditioners have?
Chemical Composition
R-410A is a composite of diflouromethane and pentafluoromethane. This mixture of R-32 and R-125 creates a new compound designed to be used in commercial and residential air conditioning devices. Sometimes referred to as Puron, Genetron and EcoFluor, R-410A is a more environmentally friendly approach to cooling than the existing coolant most air conditioners use – R-22.
To date, R-22 has been the refrigerant of choice for millions of devices. However, because R-22 will no longer be permitted in new devices starting in 2020, R-410A is growing in popularity rapidly and will soon become the standard refrigerant option in new devices.
Environmental Impact
Despite being very similar in chemical composition to other refrigerants like Freon and R-22, R-410A does not contribute to ozone depletion, a major step forward for air conditioning. However, it has as very similar global warming impact – producing nearly 1725% more damage than carbon dioxide. One of the factors that negates this high global warming risk is the fact that R-410A is being used in a more efficient manner than past refrigerants.
Choosing R-410A
You cannot simply replace the R-22 in your cooling system with R-410A. Because it requires higher pressure, the devices that run with R-410A must be built specifically for this refrigerant. As a result, many manufacturers are starting the transition to the new refrigerant now, in anticipation of the 2020 phase out date for R-22. If you are preparing to buy a new unit, keep this in mind. You can still buy R-22 devices, but they are not as environmentally friendly as this newer form of refrigerant.
Tags: Air Conditioning, Bridgemill, Green, Holly Springs, Taylorsville
Posted in Services | Comments Off
Friday, August 19th, 2011
The filters on your air conditioning unit in your Crabapple home are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.
Monthly Checks
So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.
Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.
Changing an AC Filter
If your filter is ready for a swap, here are some quick tips to get the job done:
- Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
- Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
- Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.
Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work.
Tags: Air Filtration, Bridgemill, Crabapple, Indoor Air Quality, Paulding County
Posted in Services | Comments Off
Friday, May 27th, 2011
When you are in the market for a new air conditioner, one of the decisions you will have to make is whether you want a two stage system or one that only functions in a single stage. Of course, before you can make a decision about this, you need to know what all of this means.
A single stage air conditioning system is probably what you are most familiar with. They have been around for longer and can be found in a wide variety of locations. Single stage air conditioners come on at full capacity when the temperature in your home rises above the preset level on the thermostat. Once they have effectively cooled the house, these types of air conditioners shut off until the temperature works its way back up again.
Two stage air conditioners, on the other hand, can function at either 67% or 100% of capacity depending on exactly how warm it is in your home. What that really means is that if the temperature in your home is only a little above the thermostat’s preset limit, the air conditioning system will come on at 67% and gradually cool the house to keep it right in a comfortable range.
However, if you have not been home for a while and your home has gotten very warm inside, your air conditioner will come on at full power to get the temperature down quickly. What this really means is that your air conditioner will be running more than a single stage air conditioner because it will sometimes not be using all of its power to cool.
The end result of using a two stage air conditioner is that you will receive a relatively continuous flow of cool air throughout your home. A two stage air conditioner will send in a steady but smaller stream of cooled air as opposed to the large blast of cold air you would get from a single stage system.
This results in a more consistent and comfortable environment overall, and it also makes it possible for the air conditioning system to dehumidify your house more effectively. When the air is cooled too quickly, the dehumidification system does not always have time to do its job. But with the longer cooling cycles of the two stage system, there is plenty of time to make sure the right amount of humidity is removed from the air.
Tags: Bridgemill, Cartersville, Crabapple, Single Stage, Two Stage
Posted in Services | Comments Off
Friday, April 8th, 2011
As with any misunderstood technology, there are a lot of myths and misconceptions concerning geothermal heat pumps and how well they work. While these types of systems certainly have their limitations, the same is true of just about any type of heating and cooling system you could have installed in your home. But if you are really trying to evaluate whether or not a geothermal heating system is right for your home, you need to know exactly what is true about these systems and what is just not true.
For instance, there is a widely held belief that geothermal energy is not a viable heating option in areas with harsh winters. The fact is, though, that even when the air temperature outside is below freezing, the temperature several feet below ground can be as high as 55°F.
With a ground temperature like that, a geothermal heat pump will have no trouble extracting enough heat to keep your home comfortable even when it is well below freezing outside. And even when the ground freezes, the frost usually only extends three or four feet below the surface. Since the pipes for your geothermal heat pump will be at least four feet down, the frost should not affect them at all.
Also, it is common for people to assume that geothermal heat pumps will always need to have a regular heating system in place to serve as a backup. In fact, a geothermal heat pump is quite capable of providing consistent and adequate heating for your entire house as long as it is properly sized and installed. Make sure you are dealing with an experienced and qualified contractor and you will have no problems along these lines.
There are also plenty of myths floating around out there that geothermal heat pumps are just too expensive to make sense as a home heating solution. The truth is that geothermal heating costs almost nothing to operate.
While it is true the geothermal systems are quite a bit more expensive to install than many of the other options, alternative heating systems will still cost a significant amount to install and you will also have to pay much more to operate them on a regular basis. With a geothermal heating system, you pay quite a bit up front, but it is a one-time cost and there will be minimal monthly heating bills after that.
Tags: Atlanta, Bridgemill, Cartersville, Mableton, Myths
Posted in Services | Comments Off
Join Us Online