Posts Tagged ‘Euharlee’

Buying the Right Ceiling Fan

Wednesday, April 25th, 2012

Ceiling fans really help people reduce their heating and cooling cost. They have the ability to reduce warm temperatures up to 7 degrees, while dramatically reducing air conditioning costs. During the winter months, ceiling fans can operate in reverse mode. Doing so will circulate warm air throughout the room by pushing it up toward the ceiling. Careful consideration should be given when buying a ceiling fan, because of the wide variety available.

Fan Size

The fan should not be too large or too small for your room. A rule of thumb is to have at least 7 feet of clearance from the floor to the fan. The blades and the nearest wall should be a minimum of two feet apart.

Fan Motors

For ceiling fans to operate with efficiency, the size of the motor and the ground motor windings must coincide with blade length. This will allow the fan to run without using a lot of energy and continuously without any problems. However, when the blades or motor are not balanced correctly, the fan will begin to vibrate even at lower speeds. The motors that come with outdoor fans are built to endure temperature changes and moisture.

Fan Blades

Fan blades come in a variety of sizes and shapes. Appearance however is secondary to choosing ones that will provide the best performance and stability. You also need to decide what blade pitch you want. A higher pitch equals greater air circulation at lower speeds. Blade pitches are available between 8 and 15 degrees.

Another thing to consider is fan mounts. There are three types: flush mount, down rod mount, and tri-mount. Down rods are suited for higher ceilings, flush mount is designed for lower ceilings, and the tri-mount provides the best circulation regardless of height.

For more helpful hints check us out on www.southairinc.com

Winterizing Your Home on a Budget

Tuesday, December 6th, 2011

Are you looking for inexpensive ways to save money on energy bills this  winter? Now is a great time to tackle these home projects and each of them is very affordable.

1. Add weather stripping to your doors and windows. Keeping warm air from escaping and drafts from blowing in can make a 5% to 10% difference in your energy use.

2. Seal exposed ductwork in attics and basements. Check for gaps in seams and joints, holes, or other places where warm air can escape. Use high quality mastic, rather then silver or duct tape that won’t hold as well or be efficient. Experts say that as much as 20% of warm air can escape through leaky ducts, so this is a great way to save money!

3. Put an insulation blanket on your water heater. The water tank warms up 30 or 40 gallons of water and then it starts to cool off, wasting money. An insulating blanket will slow down the heat loss substantially.

4. Program your thermostat so that the system runs less when you are nott there. Let the temperature fall 10 degrees or so when the house is empty, and you can program it to warm back up before you get home

5. Run full loads of laundry instead of several small loads. You’ll reduce your water use and your overall electrical use.

6. Add insulation to the attic. In winter, heated air escapes through the ceiling into the attic and out of the house. In summer, the attic gets hot and that air pushes down into the house, causing the air conditioner to work harder. A layer of insulation (minimum R19) in the attic will help year-round.

7. Have your furnace or heat pump cleaned and tuned up for winter. A dirty furnace or heat pump coil can waste 20% or more of the energy it uses. Having your entire HVAC system serviced before winter is a cost that might pay you back very quickly.

These are very good ways to reduce energy use on a limited budget. They are easy to accomplish and you will notice immediate results — lower energy bills every month going forward!

The Most Important Part of Your Home — Your Furnace:

Wednesday, November 30th, 2011

Winter is coming fast, and it certainly doesn’t let us forget it! Blustery winds that chill through to your bones, iced up car windows, and snow days, this often means that the temperature outside has reached as low as 30 degrees or colder when wind chill is considered!

A large reason that we are able to live comfortably in this weather is because of a special appliance that is often tucked away in your house and not really considered on a daily basis: your furnace.

Furnaces consist of three major components: the burners, a draft inducer, and a heat exchanger. When you bump up your thermostat or it detects that the temperature of your house/building has dropped below its designated temperature, it send a signal to the furnace to ignite its burners.

After the burners are ignited, the draft inducer kicks into action, and sucks the hot gases from the burners towards the heat exchanger. A draft inducer looks similar to a cars turbocharger, and works in a similar manner also. While the hot gas is moved through the heat exchanger, the furnace also brings air from your house through the heat exchanger in order to warm it. If the draft inducer is dirty in any way, this could cause the unit from igniting or staying lit.

And there you have it! Now you understand the basics of how a furnace works. Always use a professional to carry out maintenance and repairs to keep it running at peak efficiency and safe for the whole family.

Feeling a Little Chilly?

Friday, November 18th, 2011

Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems

Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.

Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.

Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.

Furnace Repair or Replace? A question from Marietta

Monday, November 14th, 2011

When the heater starts to malfunction, many homeowners debate whether they should call for furnace repair or buy an upgraded system. There are pros and cons to each choice and every individual will have to do some research and thinking to decide for himself or herself. Reparation can be the ecologically sound thing to do — or not. Many appliances are designed to go kaput at a certain age and to be hauled away to the dump.

Purchasing a new system can be good for the planet due to increased energy efficiency. If a system is so old that it guzzles energy like a hungry monster, this will make a large carbon footprint on the earth. Using a minimum of energy will be best for the planet and best for a consumer’s wallet. Here are some things to think about:

- Maintenance: An ounce of preventative maintenance is worth a pound of repair. Want to keep that HVAC working seamlessly for many years to come? Then perform regular maintenance and servicing. Replace the filter every month like clockwork.

On a specific date, such as the first of each month or every full moon, take out the old dusty one and discard it. Slip the new one into place, you have just extended the life of your furnace. Having a service technician come in at the beginning of every season to perform service will be a wise step, too.

- How old is your heater? Ancient furnace systems that clunk, clank and guzzle may be hopelessly outdated. When this old dinosaur breaks down, it may be wise to give it a decent burial. If it’s only a few years old, however, it would be wiser to call the repair person out to fix it.

- Energy star products: The government has given the “energy star” label to a variety of green products that are proven to cut energy consumption by 10 to 15%. The average family spends a couple thousand dollars to heat their home each winter and this savings can accumulate quickly. Not only will the utility bills be lower, but the government offers tax breaks to homeowners who install energy star products.

- Your repair person: It’s smart to establish a relationship with a tech before a breakdown occurs. Having an annual seasonal service performed will be the perfect opportunity to get this business relationship cemented.

When the heater goes kaput, it may be wise to call for furnace repair or might just be a wakeup call to purchase a new system. Doing a bit of homework and comparison shopping will provide answers for making an informed decision. Always choose a licensed professional.

Window Units vs. Ductless Splits for Air Conditioning: A Guide From Woodstock

Monday, August 29th, 2011

If you cannot afford or do not have duct work to support a central air conditioning system in Woodstock, there are two options – window units or ductless units. But, which is better? It depends largely on your budget, whether you rent or own and if there are any risks inherent in either choice.

Window Units

First let’s look at window units. Window units are the least expensive form of air conditioning on the market and don’t require any work on your home to install. They are good for single rooms and smaller apartments as well, and they can usually be installed by one or two people without professional assistance.

The downside of a window unit is that it cannot cool your entire home, even in an apartment. Also, window units tend to block an entire window and they pose a security risk, especially on the first floor. They are easy to remove from the outside and therefore should only be used in extreme circumstances if the window is easy to access.

Ductless Systems

Ductless systems offer benefits that counter all of the downsides of a window unit. Specifically, they don’t block the windows and are mounted inside on the walls. They are also more efficient than window units, using 30% less energy on average than a comparable window unit. They can be sized to cool your entire home and they still don’t use ductwork so extreme installation methods are not needed.

The major drawback is cost. A ductless system costs much more than a window unit, usually by 5-10 fold. They are more efficient, quieter, and less obtrusive, but they require a professional installation and the units themselves are pricy. Another issue to consider is whether you rent or own your home. Renters may not be permitted to have a system installed like this as it takes up more space and requires some work that could alter the building.

Which Is Better?

So, which should you choose? It depends on the specific needs of your home. If you have two or more zones to cool and can afford to have a ductless system installed, it is a great long term solution. However, if you are a renter, only have one or two rooms to cool or you live on a higher floor of a shared building, a window unit may be sufficient for your needs.

What to Look for when a Home is 100 Years Old

Monday, July 18th, 2011

Many people like older homes, but at a certain point, the age of a home can be a bit of a turnoff. It’s not the architecture – old homes are magnificently built and tend to have more character in the woodwork and nooks and crannies than any new home. But, when you move beyond how impressive early 20th century (or earlier) architecture is, you might find a number of maintenance and upkeep issues that have only been made worse by the passage of time.

Common Problems to Watch For

As with a 50 year old home, materials are a big issue. You need to have your home tested for lead paint and asbestos – both things that can be incredibly dangerous for every resident, especially children. These are very likely to be a part of the home if it hasn’t been remodeled in the last 30 years. Retrofitting to cover them up or remove them will be an added expense.

Additionally, older homes have much greater ratios of ventilation. If insulation has not been added in the last 25 years to cover those vents and gaps, your home will be very drafty, which is uncomfortable in the winter and costly year round. Make sure to have your home pressure tested and sealed up as soon as possible.

Upgrades You Can Make

Electricity is another major issue in older homes. While most old homes have been owned multiple times and likely upgraded since they were built, occasionally you will run across a house with extremely old wiring. That might mean a low capacity panel box or single strand wiring. Either way, it’s unsafe and unstable – for modern appliances and electronics you’ll need to upgrade that wiring as soon as possible.

The same may be true for your plumbing. If the house has original plumbing and fixtures, not only will they be inefficient, they may be rusty or prone to leakage. Sewer lines in particular are expensive replacements if they decide to break. Make sure you have these thoroughly inspected before a purchase.

The Joy of an Older Home

Despite all of the potential problems an old home might offer, there are plenty of benefits. Established neighborhoods, solid construction, and the ability to alter your home however you want are all positives you can’t overlook when buying a home. Just make sure you’re fully aware of what you’re getting into. Even a well maintained old home may have some issues that you miss on your initial walkthrough – make sure your inspector is thorough.

Why the SEER Is Important When Choosing an Air Conditioner

Monday, May 30th, 2011

There are many things to take into account when you are trying to pick out a new air conditioning system. You want one that will be powerful enough to cool the required space but not so big that it turns your home into a walk in freezer. With so many models and types on the market, it can be difficult to figure out what details you need to pay attention to and what you can ignore.

The seasonal energy efficiency rating (SEER) that each air conditioner comes with is not something you should ever disregard, however. This number is a reflection of the overall energy efficiency of the unit and it can have a huge impact on the amount you pay to keep running your air conditioner every month. The higher the SEER of a product, the more energy efficient it is and the lower your monthly bills will be.

Of course, air conditioners with a higher SEER also generally come with a higher price tag, so you will have to weigh the amount of your potential savings against the difference in price of units with different SEERs.

To calculate this, you will need to know exactly how much more energy efficient one model is compared to the others. For instance, when you know that an air conditioner with a SEER of 11 is 7% more efficient than one with a SEER of 10, you are in a better position to evaluate the potential savings.

You will still need to translate this into dollars, of course, because the amount you save with a 7% boost in efficiency will depend largely on how much you typically pay already. If you are only paying around $320 a year with a SEER 10 air conditioner, upgrading to a SEER 11 will only save you about $30. However, if your annual cooling bills are closer to $1000, you will easily save close to $150 with this small upgrade.

SEER numbers go much higher than 10 and 11 too. In fact, the highest you will probably get is a 19.5 SEER, but that will more than cut your cooling bills in half if you are starting with a SEER 10. Still, the actual amount that you will save depends on how much you were paying to begin with, but if your cooling bills are already very high, it may be worth it to invest in an expensive but very high efficiency system.

Attic Insulation – Does it Save You Money?

Friday, April 1st, 2011

While you may not spend too much time up in your attic in the winter – or at any time of year for that matter – the conditions up there can wind up having a significant impact on the size of your heating bills. Fortunately, if you’re leaking heat out of your attic like crazy, there is something you can do about it. And it won’t even take you a lot of time or cost too much, but it will wind up saving you a ton of money in the long run.

So what is it that you can do to magically save so much on your heating bills? Well, the truth is that all you really need to do is insulate your attic properly. Since the attic isn’t typically a space that people occupy often, builders often leave these areas uninsulated. That means that they’re pretty cold in the winter. But if you’re not sitting up there, does it really make any difference?

Absolutely it does. The problem with having an uninsulated attic is that heat rises and so will quickly move to the highest point in your home. This is the attic, of course, and if the attic isn’t insulated, all of that warm air that you’ve been paying to heat will go right out the top of your house. Even if the door to the attic is shut up tight, you will still be losing heat into it.

And if the attic isn’t insulated, chances are that there’s no insulation anywhere above the ceiling of the top floor of your house. With heat continually rising and escaping out of the top of your home, you’ll find that your home heating system has to work much harder to keep the house at a comfortable temperature. And the harder your heating system works, the more you’re paying in energy bills each month.

Fortunately, adding insulation to your attic is relatively easy and won’t cost you much at all. And the savings you start to see immediately on your energy bills will more than make up for the expense of having the insulation installed. Even if your attic does have some insulation in place already, it may be worth checking to make sure it’s still working well. Some types of insulation simply break down over time and you might not be getting anywhere near the protection you thought you were.