Posts Tagged ‘Holly Springs’
Wednesday, April 25th, 2012
Ceiling fans really help people reduce their heating and cooling cost. They have the ability to reduce warm temperatures up to 7 degrees, while dramatically reducing air conditioning costs. During the winter months, ceiling fans can operate in reverse mode. Doing so will circulate warm air throughout the room by pushing it up toward the ceiling. Careful consideration should be given when buying a ceiling fan, because of the wide variety available.
Fan Size
The fan should not be too large or too small for your room. A rule of thumb is to have at least 7 feet of clearance from the floor to the fan. The blades and the nearest wall should be a minimum of two feet apart.
Fan Motors
For ceiling fans to operate with efficiency, the size of the motor and the ground motor windings must coincide with blade length. This will allow the fan to run without using a lot of energy and continuously without any problems. However, when the blades or motor are not balanced correctly, the fan will begin to vibrate even at lower speeds. The motors that come with outdoor fans are built to endure temperature changes and moisture.
Fan Blades
Fan blades come in a variety of sizes and shapes. Appearance however is secondary to choosing ones that will provide the best performance and stability. You also need to decide what blade pitch you want. A higher pitch equals greater air circulation at lower speeds. Blade pitches are available between 8 and 15 degrees.
Another thing to consider is fan mounts. There are three types: flush mount, down rod mount, and tri-mount. Down rods are suited for higher ceilings, flush mount is designed for lower ceilings, and the tri-mount provides the best circulation regardless of height.
For more helpful hints check us out on www.southairinc.com
Tags: Acworth, Air Conditioning, Alpharetta, Atlanta, Austell, Canton, Cartersville, Cherokee County, Cumberland, Dallas, East Cobb, Euharlee, Fulton County, Geothermal, Holly Springs, HVAC, Indoor Air Quality, Kennesaw, Kingston, Lost Mountain, Mableton, Marietta, Mars Hill, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Air Conditioning, Energy Savings, Gas Heaters, Geothermal, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Indoor Air Quality, Insulation, Maintenance Plan/Comfort Club | Comments Off
Tuesday, December 6th, 2011
Are you looking for inexpensive ways to save money on energy bills this winter? Now is a great time to tackle these home projects and each of them is very affordable.
1. Add weather stripping to your doors and windows. Keeping warm air from escaping and drafts from blowing in can make a 5% to 10% difference in your energy use.
2. Seal exposed ductwork in attics and basements. Check for gaps in seams and joints, holes, or other places where warm air can escape. Use high quality mastic, rather then silver or duct tape that won’t hold as well or be efficient. Experts say that as much as 20% of warm air can escape through leaky ducts, so this is a great way to save money!
3. Put an insulation blanket on your water heater. The water tank warms up 30 or 40 gallons of water and then it starts to cool off, wasting money. An insulating blanket will slow down the heat loss substantially.
4. Program your thermostat so that the system runs less when you are nott there. Let the temperature fall 10 degrees or so when the house is empty, and you can program it to warm back up before you get home
5. Run full loads of laundry instead of several small loads. You’ll reduce your water use and your overall electrical use.
6. Add insulation to the attic. In winter, heated air escapes through the ceiling into the attic and out of the house. In summer, the attic gets hot and that air pushes down into the house, causing the air conditioner to work harder. A layer of insulation (minimum R19) in the attic will help year-round.
7. Have your furnace or heat pump cleaned and tuned up for winter. A dirty furnace or heat pump coil can waste 20% or more of the energy it uses. Having your entire HVAC system serviced before winter is a cost that might pay you back very quickly.
These are very good ways to reduce energy use on a limited budget. They are easy to accomplish and you will notice immediate results — lower energy bills every month going forward!
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Insulation, Maintenance Plan/Comfort Club, Rebates & Tax Credits, Tax Credits, Trane, Winterizing | Comments Off
Wednesday, November 30th, 2011
Winter is coming fast, and it certainly doesn’t let us forget it! Blustery winds that chill through to your bones, iced up car windows, and snow days, this often means that the temperature outside has reached as low as 30 degrees or colder when wind chill is considered!
A large reason that we are able to live comfortably in this weather is because of a special appliance that is often tucked away in your house and not really considered on a daily basis: your furnace.
Furnaces consist of three major components: the burners, a draft inducer, and a heat exchanger. When you bump up your thermostat or it detects that the temperature of your house/building has dropped below its designated temperature, it send a signal to the furnace to ignite its burners.
After the burners are ignited, the draft inducer kicks into action, and sucks the hot gases from the burners towards the heat exchanger. A draft inducer looks similar to a cars turbocharger, and works in a similar manner also. While the hot gas is moved through the heat exchanger, the furnace also brings air from your house through the heat exchanger in order to warm it. If the draft inducer is dirty in any way, this could cause the unit from igniting or staying lit.
And there you have it! Now you understand the basics of how a furnace works. Always use a professional to carry out maintenance and repairs to keep it running at peak efficiency and safe for the whole family.
Tags: Acworth, Alpharetta, Atlanta, Austell, Big Creek, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Cobb County, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Maintenance Plan/Comfort Club, Rebates & Tax Credits, Tax Credits, Trane, Uncategorized, Winterizing | Comments Off
Friday, November 18th, 2011
Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems
Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.
Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.
Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Waleska, White, Woodstock
Posted in Gas Heaters, Heat Pumps, Maintenance Plan/Comfort Club, Trane | Comments Off
Monday, November 14th, 2011
When the heater starts to malfunction, many homeowners debate whether they should call for furnace repair or buy an upgraded system. There are pros and cons to each choice and every individual will have to do some research and thinking to decide for himself or herself. Reparation can be the ecologically sound thing to do — or not. Many appliances are designed to go kaput at a certain age and to be hauled away to the dump.
Purchasing a new system can be good for the planet due to increased energy efficiency. If a system is so old that it guzzles energy like a hungry monster, this will make a large carbon footprint on the earth. Using a minimum of energy will be best for the planet and best for a consumer’s wallet. Here are some things to think about:
- Maintenance: An ounce of preventative maintenance is worth a pound of repair. Want to keep that HVAC working seamlessly for many years to come? Then perform regular maintenance and servicing. Replace the filter every month like clockwork.
On a specific date, such as the first of each month or every full moon, take out the old dusty one and discard it. Slip the new one into place, you have just extended the life of your furnace. Having a service technician come in at the beginning of every season to perform service will be a wise step, too.
- How old is your heater? Ancient furnace systems that clunk, clank and guzzle may be hopelessly outdated. When this old dinosaur breaks down, it may be wise to give it a decent burial. If it’s only a few years old, however, it would be wiser to call the repair person out to fix it.
- Energy star products: The government has given the “energy star” label to a variety of green products that are proven to cut energy consumption by 10 to 15%. The average family spends a couple thousand dollars to heat their home each winter and this savings can accumulate quickly. Not only will the utility bills be lower, but the government offers tax breaks to homeowners who install energy star products.
- Your repair person: It’s smart to establish a relationship with a tech before a breakdown occurs. Having an annual seasonal service performed will be the perfect opportunity to get this business relationship cemented.
When the heater goes kaput, it may be wise to call for furnace repair or might just be a wakeup call to purchase a new system. Doing a bit of homework and comparison shopping will provide answers for making an informed decision. Always choose a licensed professional.
Tags: Acworth, Alpharetta, Austell, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lost Mountain, Marietta, Mars Hill, Milton, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Townlake, Vinings, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Maintenance Plan/Comfort Club, Tax Credits, Trane | Comments Off
Monday, September 5th, 2011
If you’ve recently started researching a new air conditioner for your Taylorsville home, you may have run across “R410A” – a newer form of refrigerant increasingly being used in high end air conditioning equipment. What is R410A and why is it different from the existing refrigerant most air conditioners have?
Chemical Composition
R-410A is a composite of diflouromethane and pentafluoromethane. This mixture of R-32 and R-125 creates a new compound designed to be used in commercial and residential air conditioning devices. Sometimes referred to as Puron, Genetron and EcoFluor, R-410A is a more environmentally friendly approach to cooling than the existing coolant most air conditioners use – R-22.
To date, R-22 has been the refrigerant of choice for millions of devices. However, because R-22 will no longer be permitted in new devices starting in 2020, R-410A is growing in popularity rapidly and will soon become the standard refrigerant option in new devices.
Environmental Impact
Despite being very similar in chemical composition to other refrigerants like Freon and R-22, R-410A does not contribute to ozone depletion, a major step forward for air conditioning. However, it has as very similar global warming impact – producing nearly 1725% more damage than carbon dioxide. One of the factors that negates this high global warming risk is the fact that R-410A is being used in a more efficient manner than past refrigerants.
Choosing R-410A
You cannot simply replace the R-22 in your cooling system with R-410A. Because it requires higher pressure, the devices that run with R-410A must be built specifically for this refrigerant. As a result, many manufacturers are starting the transition to the new refrigerant now, in anticipation of the 2020 phase out date for R-22. If you are preparing to buy a new unit, keep this in mind. You can still buy R-22 devices, but they are not as environmentally friendly as this newer form of refrigerant.
Tags: Air Conditioning, Bridgemill, Green, Holly Springs, Taylorsville
Posted in Air Conditioning | Comments Off
Monday, August 29th, 2011
If you cannot afford or do not have duct work to support a central air conditioning system in Woodstock, there are two options – window units or ductless units. But, which is better? It depends largely on your budget, whether you rent or own and if there are any risks inherent in either choice.
Window Units
First let’s look at window units. Window units are the least expensive form of air conditioning on the market and don’t require any work on your home to install. They are good for single rooms and smaller apartments as well, and they can usually be installed by one or two people without professional assistance.
The downside of a window unit is that it cannot cool your entire home, even in an apartment. Also, window units tend to block an entire window and they pose a security risk, especially on the first floor. They are easy to remove from the outside and therefore should only be used in extreme circumstances if the window is easy to access.
Ductless Systems
Ductless systems offer benefits that counter all of the downsides of a window unit. Specifically, they don’t block the windows and are mounted inside on the walls. They are also more efficient than window units, using 30% less energy on average than a comparable window unit. They can be sized to cool your entire home and they still don’t use ductwork so extreme installation methods are not needed.
The major drawback is cost. A ductless system costs much more than a window unit, usually by 5-10 fold. They are more efficient, quieter, and less obtrusive, but they require a professional installation and the units themselves are pricy. Another issue to consider is whether you rent or own your home. Renters may not be permitted to have a system installed like this as it takes up more space and requires some work that could alter the building.
Which Is Better?
So, which should you choose? It depends on the specific needs of your home. If you have two or more zones to cool and can afford to have a ductless system installed, it is a great long term solution. However, if you are a renter, only have one or two rooms to cool or you live on a higher floor of a shared building, a window unit may be sufficient for your needs.
Tags: Air Conditioning, Euharlee, Holly Springs, Woodstock
Posted in Air Conditioning | Comments Off
Wednesday, July 27th, 2011
If you own a home, there are a lot of fun ways you can stay on top of regular maintenance without spending hundreds or thousands of dollars to hire a contractor. Sure, there are some tasks only a contractor should perform, but there are plenty of others you can take care of with a little spare time on the weekend.
- Fixing Leaks – Unless it’s in a main line or in your sewer, you can usually fix a leak or clog in your pipes by yourself. Replacing a faucet, snaking a line, or taking apart a fixture should still be done with the help of manufacturer’s guidelines, but as long as you turn the water supply off correctly, you should be okay taking things apart and making quick repairs.
- Yard Installations – Short of digging it up (always have it checked for gas and electricity lines), you can do pretty much anything on your own in the yard. This includes composting, landscaping, adding a barbeque pit or upgrading your back porch.
- Painting – Feel free to paint anything in or around your home without the help of a pro. Just make sure to use proper ventilation and to ensure that you remove any old paint carefully. If you’re not sure about the age of your paint, it should be tested for lead before you chip it clean, especially if you have children.
- Replace Appliances – Old appliances can be removed and replaced relatively easily as long as you have someone to help you get rid of the old ones. Also, if you have a gas stove or other appliances that run on gas, always have them checked by a professional. Never unplug gas lines without someone there to ensure the gas supply to your home is off.
- Tiling – Tiling is something anyone can do, but make sure you’re ready for the time commitment. Especially if you plan on putting tiles on a wall, it’s easy to make a mistake and ruin good tiles or good walls. Also, proper sealing around water fixtures like a bathtub or sink is vital. If you’re not sure, call a plumber to help.
There are a lot of ways you can have fun and fix up your house without paying for a professional’s help. But, remember not to take on jobs that are too much for you. If you aren’t sure how to complete a task or you want a second opinion, never be afraid to call a pro in for some help. Even if they just check your work, it will save you money and you get the satisfaction of having done the work yourself.
Tags: Holly Springs, Kennesaw, Leaks, Lost Mountain, Painting, Tiling
Posted in Home Savings | Comments Off
Friday, July 15th, 2011
Everyone wants to feel handy around the house and there are a lot of great things you can do to help keep your home and its various systems in tip top shape, but not everything should be on your to do list. Some tasks are dangerous or require special equipment and should only be performed by professionals. Here is a list of some such tasks and why you should avoid them:
- Service a Gas Appliance or Furnace – If it involves a gas line, call a professional. This goes doubly so for live electrical work. You should always call someone who has the specific certification and licenses needed to work on your gas or electricity systems. They know the safety precautions and if there is a problem they will recognize it immediately and act fast to keep everyone safe.
- Annual Maintenance – Filter changes, cleaning and other small jobs can be on your to do list, but big time maintenance done annually on your exhaust pipes, furnace or air conditioner should be done by a professional who has the equipment for it.
- Duct Cleaning or Patching – You can clean the vents and the entry lines at your air handler just fine, but how will you reach the middle of your ducts without an industrial strength vacuum and duct cleaning system? Patching is similarly hard without the right equipment.
- Remodeling of a Room – Unless you have the necessary skills and know what permits are needed, heavy duty remodeling of a kitchen, bathroom or new room should be done by someone with plumbing certification and experience.
- Sewer Line Service – Always call an expert for anything related to your sewer or drainage system. They are not only complicated, but tend to be directly connected to city property and require a permit to work on. Even if you don’t break anything, the legal implications of this work require professional help.
- Roofing Upgrades – Even just a patch on the roof should be handled by someone who is skilled and experienced in this type of work. They know the pitfalls of walking on an unsteady surface high above the ground and they can ensure the new roof will last for as long as is necessary.
There are a lot of fun things you can do around your home to keep it in good condition, but for the big stuff, always call a pro – if not for the sake of your home, for your health and wellbeing.
Tags: Dallas, Fulton County, Holly Springs, Mars Hill
Posted in Home Savings | Comments Off
Wednesday, June 29th, 2011
Air conditioners can definitely make it easier to get through a particularly hot and sticky summer. But they are also pretty expensive to run, especially if you live in an area with long, hot summers. Fortunately, there are quite a few things you can do to help your air conditioner keep your home cool without running up those astronomical energy bills.
- Think about Your Thermostat – Most people set their thermostat at one temperature and leave it there. But does it really make sense to pay to keep your home cool all day long when no one’s home? Instead, try turning up the temperature when you leave the house and then again at night before you go to bed. It’s likely you won’t notice the difference and even an adjustment of a couple of degrees can make a big difference.
- Multiple Climate Zones – When you are home, of course, you want to set your thermostat to a temperature you’ll be comfortable with. But that probably still means you’ll be cooling a lot of empty space. Installing a multi-zone system allows you to set different temperatures for different parts of your home. You can keep the spaces you use regularly cool and comfortable without wasting money paying to cool the unoccupied parts of your home.
- Ceiling Fans – It might seem silly at first glance to use a ceiling fan at the same time as an air conditioner. But the truth is that using a ceiling fan to compliment your air conditioning system can actually save you a lot of money. Ceiling fans use next to no electricity to operate and they can make the house feel a few degrees cooler. With that added help, you can turn your thermostat up a few degrees without sacrificing indoor comfort and save yourself quite a bit of money – more than enough to cover the cost of running the ceiling fan.
- Keep Things Sealed – Making sure your house is well sealed and insulated is another important way to keep your energy usage down during the summer. The more cool air that escapes, the harder your system has to work and the more energy it will use.
- Proper Maintenance – Keeping up with the recommended maintenance for your air conditioning system is the best way to make sure it maintains the highest possible level of energy efficiency. Over time, it will ensure your system stays efficient longer as well – well beyond the initial lifespan estimates.
Tags: Holly Springs, Kennesaw, Lake Arrowhead
Posted in Air Conditioning | Comments Off
Join Us Online