Posts Tagged ‘Kingston’
Wednesday, April 25th, 2012
Ceiling fans really help people reduce their heating and cooling cost. They have the ability to reduce warm temperatures up to 7 degrees, while dramatically reducing air conditioning costs. During the winter months, ceiling fans can operate in reverse mode. Doing so will circulate warm air throughout the room by pushing it up toward the ceiling. Careful consideration should be given when buying a ceiling fan, because of the wide variety available.
Fan Size
The fan should not be too large or too small for your room. A rule of thumb is to have at least 7 feet of clearance from the floor to the fan. The blades and the nearest wall should be a minimum of two feet apart.
Fan Motors
For ceiling fans to operate with efficiency, the size of the motor and the ground motor windings must coincide with blade length. This will allow the fan to run without using a lot of energy and continuously without any problems. However, when the blades or motor are not balanced correctly, the fan will begin to vibrate even at lower speeds. The motors that come with outdoor fans are built to endure temperature changes and moisture.
Fan Blades
Fan blades come in a variety of sizes and shapes. Appearance however is secondary to choosing ones that will provide the best performance and stability. You also need to decide what blade pitch you want. A higher pitch equals greater air circulation at lower speeds. Blade pitches are available between 8 and 15 degrees.
Another thing to consider is fan mounts. There are three types: flush mount, down rod mount, and tri-mount. Down rods are suited for higher ceilings, flush mount is designed for lower ceilings, and the tri-mount provides the best circulation regardless of height.
For more helpful hints check us out on www.southairinc.com
Tags: Acworth, Air Conditioning, Alpharetta, Atlanta, Austell, Canton, Cartersville, Cherokee County, Cumberland, Dallas, East Cobb, Euharlee, Fulton County, Geothermal, Holly Springs, HVAC, Indoor Air Quality, Kennesaw, Kingston, Lost Mountain, Mableton, Marietta, Mars Hill, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Air Conditioning, Energy Savings, Gas Heaters, Geothermal, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Indoor Air Quality, Insulation, Maintenance Plan/Comfort Club | Comments Off
Tuesday, December 6th, 2011
Are you looking for inexpensive ways to save money on energy bills this winter? Now is a great time to tackle these home projects and each of them is very affordable.
1. Add weather stripping to your doors and windows. Keeping warm air from escaping and drafts from blowing in can make a 5% to 10% difference in your energy use.
2. Seal exposed ductwork in attics and basements. Check for gaps in seams and joints, holes, or other places where warm air can escape. Use high quality mastic, rather then silver or duct tape that won’t hold as well or be efficient. Experts say that as much as 20% of warm air can escape through leaky ducts, so this is a great way to save money!
3. Put an insulation blanket on your water heater. The water tank warms up 30 or 40 gallons of water and then it starts to cool off, wasting money. An insulating blanket will slow down the heat loss substantially.
4. Program your thermostat so that the system runs less when you are nott there. Let the temperature fall 10 degrees or so when the house is empty, and you can program it to warm back up before you get home
5. Run full loads of laundry instead of several small loads. You’ll reduce your water use and your overall electrical use.
6. Add insulation to the attic. In winter, heated air escapes through the ceiling into the attic and out of the house. In summer, the attic gets hot and that air pushes down into the house, causing the air conditioner to work harder. A layer of insulation (minimum R19) in the attic will help year-round.
7. Have your furnace or heat pump cleaned and tuned up for winter. A dirty furnace or heat pump coil can waste 20% or more of the energy it uses. Having your entire HVAC system serviced before winter is a cost that might pay you back very quickly.
These are very good ways to reduce energy use on a limited budget. They are easy to accomplish and you will notice immediate results — lower energy bills every month going forward!
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Insulation, Maintenance Plan/Comfort Club, Rebates & Tax Credits, Tax Credits, Trane, Winterizing | Comments Off
Wednesday, November 30th, 2011
Winter is coming fast, and it certainly doesn’t let us forget it! Blustery winds that chill through to your bones, iced up car windows, and snow days, this often means that the temperature outside has reached as low as 30 degrees or colder when wind chill is considered!
A large reason that we are able to live comfortably in this weather is because of a special appliance that is often tucked away in your house and not really considered on a daily basis: your furnace.
Furnaces consist of three major components: the burners, a draft inducer, and a heat exchanger. When you bump up your thermostat or it detects that the temperature of your house/building has dropped below its designated temperature, it send a signal to the furnace to ignite its burners.
After the burners are ignited, the draft inducer kicks into action, and sucks the hot gases from the burners towards the heat exchanger. A draft inducer looks similar to a cars turbocharger, and works in a similar manner also. While the hot gas is moved through the heat exchanger, the furnace also brings air from your house through the heat exchanger in order to warm it. If the draft inducer is dirty in any way, this could cause the unit from igniting or staying lit.
And there you have it! Now you understand the basics of how a furnace works. Always use a professional to carry out maintenance and repairs to keep it running at peak efficiency and safe for the whole family.
Tags: Acworth, Alpharetta, Atlanta, Austell, Big Creek, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Cobb County, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Maintenance Plan/Comfort Club, Rebates & Tax Credits, Tax Credits, Trane, Uncategorized, Winterizing | Comments Off
Friday, November 18th, 2011
Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems
Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.
Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.
Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Waleska, White, Woodstock
Posted in Gas Heaters, Heat Pumps, Maintenance Plan/Comfort Club, Trane | Comments Off
Monday, November 14th, 2011
When the heater starts to malfunction, many homeowners debate whether they should call for furnace repair or buy an upgraded system. There are pros and cons to each choice and every individual will have to do some research and thinking to decide for himself or herself. Reparation can be the ecologically sound thing to do — or not. Many appliances are designed to go kaput at a certain age and to be hauled away to the dump.
Purchasing a new system can be good for the planet due to increased energy efficiency. If a system is so old that it guzzles energy like a hungry monster, this will make a large carbon footprint on the earth. Using a minimum of energy will be best for the planet and best for a consumer’s wallet. Here are some things to think about:
- Maintenance: An ounce of preventative maintenance is worth a pound of repair. Want to keep that HVAC working seamlessly for many years to come? Then perform regular maintenance and servicing. Replace the filter every month like clockwork.
On a specific date, such as the first of each month or every full moon, take out the old dusty one and discard it. Slip the new one into place, you have just extended the life of your furnace. Having a service technician come in at the beginning of every season to perform service will be a wise step, too.
- How old is your heater? Ancient furnace systems that clunk, clank and guzzle may be hopelessly outdated. When this old dinosaur breaks down, it may be wise to give it a decent burial. If it’s only a few years old, however, it would be wiser to call the repair person out to fix it.
- Energy star products: The government has given the “energy star” label to a variety of green products that are proven to cut energy consumption by 10 to 15%. The average family spends a couple thousand dollars to heat their home each winter and this savings can accumulate quickly. Not only will the utility bills be lower, but the government offers tax breaks to homeowners who install energy star products.
- Your repair person: It’s smart to establish a relationship with a tech before a breakdown occurs. Having an annual seasonal service performed will be the perfect opportunity to get this business relationship cemented.
When the heater goes kaput, it may be wise to call for furnace repair or might just be a wakeup call to purchase a new system. Doing a bit of homework and comparison shopping will provide answers for making an informed decision. Always choose a licensed professional.
Tags: Acworth, Alpharetta, Austell, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lost Mountain, Marietta, Mars Hill, Milton, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Townlake, Vinings, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Maintenance Plan/Comfort Club, Tax Credits, Trane | Comments Off
Monday, July 11th, 2011
If you’re in the market for any type of appliance for your home, you’ve probably come across some that boast an Energy Star certification. But what does this really mean? After all, there are all types of special labels that manufacturers put on their products to make them look better, so how can you know which ones are really worth paying attention to?
Why Energy Star Matters
The truth is that no matter what type of appliance you’re looking for, from a coffee maker to a new furnace, buying one with the Energy Star label is definitely a good investment. This certification is conferred by the Environmental Protection Agency (EPA) and it can only be used on products that pass the EPA’s stringent tests for energy efficiency and environmental impact.
Energy Star products create fewer pollutants like greenhouse gasses because they use less energy to get the job done than their inefficient counterparts. This is great for our planet, but it also translates to savings for you as a consumer. Because Energy Star appliances use less energy to heat or cool your home or do whatever else you need them to do, your monthly bills will be significantly reduced.
Quality and Performance Measured
And you don’t have to worry about inferior performance as a result of increased energy efficiency either. Energy Star products can only receive the label if they provide all of the features you’ve come to expect from comparable products across the board. They need to maintain high energy efficiency ratings while still maintaining a superior level of performance.
While it’s true that you may wind up paying a bit more for an Energy Star product, that is only a one-time cost. If you compare the monthly savings you’ll receive by using your Energy Star appliance on a regular basis to what you would pay out over time with a less efficient model, it’s easy to see how the Energy Star product costs you less.
For all of these reasons, the Energy Star rating is definitely worth looking out for when shopping for home appliances and equipment. These products are made to be reliably energy efficient and can save you a ton over the years as long as they’re properly cared for.
Tags: Austell, Cobb County, Cumberland, energy star, Kingston, Paulding County
Posted in Home Savings | Comments Off
Wednesday, June 1st, 2011
If your air conditioner does not seem to be working as well as it should, your natural first reaction is to go out and take a look at the compressor to see if there is anything you can do quickly to correct the problem. Of course, you cannot assess the situation unless you know what you are looking for. For instance, if you see ice forming on the condenser coil or anywhere else on the air conditioning system, you will know you found the likely source of the problem.
Ice can form in your air conditioner for a number of reasons. The most common one is that your refrigerant levels are low. Since this refrigerant is contained in a closed system, a deficiency in refrigerant means that there must be a leak somewhere in that system. Only a certified professional can refill your refrigerant and determine where the leaks are in the system to make the necessary repairs.
Another reason that ice can develop in your air conditioner is because the air is not flowing fast enough through the system and across the coils. This can happen because of a problem with the fan or because there is an actual physical impediment to the air flow. Regardless of the reason, the ice will form because without adequate air flow the condenser coils will get too cold.
These coils are typically kept just above freezing by the constant flow of air across them. When the air passes by them at this temperature, the moisture from the air condenses on the surface of the coil. But because the coil is not quite freezing, the water then runs down into a collection pan. When the coil is too cold, however, the moisture from the air will freeze on the coil before it can run off.
This ice actually manages to insulate the coil and keeps it from properly cooling the air or removing any additional moisture. If left unattended, the ice in your central air conditioning system can cause real damage to the unit. Plus, it is not allowing the air conditioner to do its job and cool your house down. So if you notice any amount of ice at all beginning to form on any part of your air conditioner, be sure to call for professional service right away.
Tags: Ice, Kennesaw, Kingston, Lake Arrowhead
Posted in Air Conditioning | Comments Off
Monday, April 18th, 2011
On the whole, heat pumps are efficient, durable and effective. They are built to run all year round without needing any more maintenance than your average furnace or air conditioning system and they have an average lifespan comparable to those other types of home comfort systems as well.
That’s not to say that there aren’t things you can do to keep your heat pump in good working order, however. Keeping up with the professional maintenance visits is an important step to take along these lines to be sure, but there are also some other things you can do on your own as well to help ensure the continued efficiency and health of your heat pump system.
Proper filter care is an important part of keeping your heat pump working the way it should. If you don’t have a heat pump yet but are thinking of getting one, make sure you have the installation technician show you where the filter is located and how to replace it.
If your system’s already been in place for some time, you can still find out how to care for the filter from your annual maintenance technician or you can probably even find it on your own by taking a close look at your heat pump. The filters are meant to be removed on a regular basis so they’re typically not hard to get to. However, you should always be sure that all of the power to your heat pump is turned off before you open it up to try and find, replace or clean the filter.
Most heat pump filters are meant to be changed or cleaned about once every 90 days or so. However, the specific requirements for each system can vary considerably, so you should be sure to find out what is recommended for the model of heat pump that you have.
Also, you’ll want to know what type of filter you have so that you can purchase the appropriate replacement. The model number for each filter should be clearly printed on it, so simply slide your current filter out and make note of the number so that you can purchase the correct type as a replacement.
Most heat pumps have replaceable filters, but some still do have permanent filters that are meant to be cleaned and then returned to service. If you have one of these types of filters, be sure to read the instructions for cleaning carefully before proceding.
Tags: Kingston
Posted in Heat Pumps | Comments Off
Join Us Online