Posts Tagged ‘Paulding County’
Wednesday, April 25th, 2012
Ceiling fans really help people reduce their heating and cooling cost. They have the ability to reduce warm temperatures up to 7 degrees, while dramatically reducing air conditioning costs. During the winter months, ceiling fans can operate in reverse mode. Doing so will circulate warm air throughout the room by pushing it up toward the ceiling. Careful consideration should be given when buying a ceiling fan, because of the wide variety available.
Fan Size
The fan should not be too large or too small for your room. A rule of thumb is to have at least 7 feet of clearance from the floor to the fan. The blades and the nearest wall should be a minimum of two feet apart.
Fan Motors
For ceiling fans to operate with efficiency, the size of the motor and the ground motor windings must coincide with blade length. This will allow the fan to run without using a lot of energy and continuously without any problems. However, when the blades or motor are not balanced correctly, the fan will begin to vibrate even at lower speeds. The motors that come with outdoor fans are built to endure temperature changes and moisture.
Fan Blades
Fan blades come in a variety of sizes and shapes. Appearance however is secondary to choosing ones that will provide the best performance and stability. You also need to decide what blade pitch you want. A higher pitch equals greater air circulation at lower speeds. Blade pitches are available between 8 and 15 degrees.
Another thing to consider is fan mounts. There are three types: flush mount, down rod mount, and tri-mount. Down rods are suited for higher ceilings, flush mount is designed for lower ceilings, and the tri-mount provides the best circulation regardless of height.
For more helpful hints check us out on www.southairinc.com
Tags: Acworth, Air Conditioning, Alpharetta, Atlanta, Austell, Canton, Cartersville, Cherokee County, Cumberland, Dallas, East Cobb, Euharlee, Fulton County, Geothermal, Holly Springs, HVAC, Indoor Air Quality, Kennesaw, Kingston, Lost Mountain, Mableton, Marietta, Mars Hill, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Air Conditioning, Energy Savings, Gas Heaters, Geothermal, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Indoor Air Quality, Insulation, Maintenance Plan/Comfort Club | Comments Off
Friday, November 18th, 2011
Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems
Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.
Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.
Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Waleska, White, Woodstock
Posted in Gas Heaters, Heat Pumps, Maintenance Plan/Comfort Club, Trane | Comments Off
Monday, November 14th, 2011
When the heater starts to malfunction, many homeowners debate whether they should call for furnace repair or buy an upgraded system. There are pros and cons to each choice and every individual will have to do some research and thinking to decide for himself or herself. Reparation can be the ecologically sound thing to do — or not. Many appliances are designed to go kaput at a certain age and to be hauled away to the dump.
Purchasing a new system can be good for the planet due to increased energy efficiency. If a system is so old that it guzzles energy like a hungry monster, this will make a large carbon footprint on the earth. Using a minimum of energy will be best for the planet and best for a consumer’s wallet. Here are some things to think about:
- Maintenance: An ounce of preventative maintenance is worth a pound of repair. Want to keep that HVAC working seamlessly for many years to come? Then perform regular maintenance and servicing. Replace the filter every month like clockwork.
On a specific date, such as the first of each month or every full moon, take out the old dusty one and discard it. Slip the new one into place, you have just extended the life of your furnace. Having a service technician come in at the beginning of every season to perform service will be a wise step, too.
- How old is your heater? Ancient furnace systems that clunk, clank and guzzle may be hopelessly outdated. When this old dinosaur breaks down, it may be wise to give it a decent burial. If it’s only a few years old, however, it would be wiser to call the repair person out to fix it.
- Energy star products: The government has given the “energy star” label to a variety of green products that are proven to cut energy consumption by 10 to 15%. The average family spends a couple thousand dollars to heat their home each winter and this savings can accumulate quickly. Not only will the utility bills be lower, but the government offers tax breaks to homeowners who install energy star products.
- Your repair person: It’s smart to establish a relationship with a tech before a breakdown occurs. Having an annual seasonal service performed will be the perfect opportunity to get this business relationship cemented.
When the heater goes kaput, it may be wise to call for furnace repair or might just be a wakeup call to purchase a new system. Doing a bit of homework and comparison shopping will provide answers for making an informed decision. Always choose a licensed professional.
Tags: Acworth, Alpharetta, Austell, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lost Mountain, Marietta, Mars Hill, Milton, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Townlake, Vinings, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Maintenance Plan/Comfort Club, Tax Credits, Trane | Comments Off
Friday, November 11th, 2011
What is carbon monoxide?
Carbon monoxide (CO) is an odorless, colorless, but dangerous gas. It is produced when a fuel such as natural gas, oil, kerosene, wood or charcoal is burned. Exposure to CO reduces the blood’s ability to carry oxygen. Fuel-burning appliances used indoors must be maintained, used properly and fully vented to the outdoors to prevent dangerous levels of CO. Hundreds of people die accidentally every year from CO poisoning caused by malfunctioning or improperly used fuel-burning appliances.
What are the health effects of carbon monoxide?
Once inhaled, CO attaches to the hemoglobin in the red blood cells. Hemoglobin normally carries oxygen throughout the body. When CO attaches, it blocks the oxygen the body must have, creating a wide range of health problems.
Breathing low levels of CO can cause:
- Headache
- Nausea
- Dizziness
- Weakness
- Confusion
- Disorientation1
Many of these symptoms are similar to the flu, food poisoning or other illnesses. So you may not suspect CO poisoning. If symptoms persist, and especially if they get better after you leave the building, CO may be the cause.
Breathing higher levels of CO causes flu-like symptoms such as headaches, dizziness and weakness in healthy people.
Breathing high levels of CO also can cause:
- Sleepiness
- Nausea
- Anxiety or depression
- Vomiting
- Confusion
- Impaired vision
- Impaired coordination
- Disorientation2
Breathing CO at low levels regularly may cause permanent mental or physical problems. At very high levels, it causes loss of consciousness and death.2
Approximately 450 people die each year from CO exposure related to fuel-burning, residential appliances. Thousands more became ill or sought medical attention.3 CO poisoning is estimated to cause more than 50,000 emergency room visits in the United States each year.2
How can you protect yourself from carbon monoxide?
Make sure stoves or other devices that burn fuel indoors are fully vented to the outdoors. Have a professional check them once a year to be sure they are running well.
Sources include:
- Gas appliances (furnaces, ranges, ovens, water heaters, clothes dryers, etc.)
- Fireplaces, wood stoves
- Coal or oil furnaces
- Space heaters or oil or kerosene heaters
- Charcoal grills, camp stoves
- Gas-powered lawn mowers and power tools
- Automobile exhaust fumes
The following simple steps can prevent CO poisoning:
- Make sure appliances are installed and working according to manufacturers’ instructions and local building codes.
- Never use unvented appliances — make sure all appliances are fully vented to the outdoors.
- Have the heating system, chimney and flue inspected and cleaned by a qualified technician every year.
- Do not use ovens and gas ranges to heat your home.
- Do not burn charcoal, kerosene lanterns or portable camp stoves inside a home, cabin, recreational vehicle or camper.
- Do not operate gasoline-powered engines in confined areas such as garages or basements.
- Never leave your car or mower running in a closed garage.
- Make sure your furnace has an adequate intake of outside air.
- Install a CO detector with an audible alarm in your home and garage.
- Cigarettes, pipes and cigars also produce carbon monoxide. Do not let anyone smoke inside your home.
After an emergency or power outage, be sure to remember these steps so you don’t risk your family’s health. Too many people are poisoned by CO after bad weather emergencies, like snowstorms and hurricanes. You may need to seek shelter elsewhere until the electricity is back.
Should I buy a carbon monoxide detector?
Tags: Acworth, Air Filtration, Atlanta, Austell, Bridgemill, Cherokee County, Dallas, Indoor Air Quality, Kennesaw, Marietta, Paulding County, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Indoor Air Quality, Oil Heaters, Winterizing | Comments Off
Friday, September 16th, 2011
There are a lot of responsibilities you’ll face as a Northpoint homeowner, but one of the most important is the selection of good appliances that will keep your energy bills down and improve the value of your home. But, what factors should you consider when choosing a new appliance to ensure you get the very best? Here are some things to keep in mind.
- Capacity – First, make sure you know the capacity you need for your new appliance, along with the size available for installation. Choosing the perfect air conditioning system is great, but if it doesn’t fit the space you have available, it might not be a good selection.
- Energy Efficiency – Next on the list should be energy efficiency. Be aware that this will directly affect the price. So, if price is a major issue for you, move it up on the list by at least one spot. However, if you want to save money in the long term on electricity and water and you want to do your part for the environment, look for Energy Star labels and the highest efficiency ratings on the market.
- Cost – Cost is a big deal for almost all homeowners. Unless you have very specific needs, you should break down your search by budget range. Most of the time, you can contact an appliance salesperson or contractor and give them a budget with which to work. If researching online, use ConsumerReports.org or Amazon.com to review specific models by price range (you may even find a good deal).
- Noise Factor – Many people forget just how much noise an appliance makes until they install it and realize they can’t hear a person from three feet away in the laundry room. Noise cancellation costs more, but in some instances, especially for appliances in the living space like a refrigerator, air conditioner or bathroom fixture, it’s a major plus.
- Digital Controls – Most new top of the line appliances have digital readouts and LCD displays that allow you to review your options, reduce energy consumption and make quick adjustments. However, digital readouts and expert controls are not always necessary to get an efficient, affordable device, so this becomes a convenience factor.
Review your options carefully before selecting an appliance for your home. Organize the above five factors by importance to you and review the options in that range accordingly. You’ll hopefully find the perfect appliance for your needs.
Tags: Air Conditioning, Energy Savings, Mountain Park, Northpoint, Paulding County, Townlake
Posted in Air Conditioning, Energy Savings | Comments Off
Monday, September 12th, 2011
Replacing the filters in your ventilation system regularly is an essential part of your Canton home’s maintenance. It keeps the expensive HVAC machinery running smoothly, saves you money and helps safeguard the health of your loved ones.
How often is often enough to replace your air conditioner filter, though? The short answer is that it depends on your air conditioner, the type of filter and your family’s needs. Below are some guidelines to help you keep it all straight and stay on top of a filter changing schedule.
Rule of Thumb
As a general rule, you should be prepared to change your AC filter every three months when it’s in use. Your filter may require more frequent replacement, which will be discussed in a little more detail below. Although three months is the general rule, you should still inspect your AC filter every month and replace it whenever it’s visibly dirty. That dirt you see not only bogs down the air conditioner, but you may also wind up breathing it in.
More Specifically
There are different kinds of air conditioner filters. Where they vary is in efficiency, which is indicated on a scale called the Minimum Efficiency Reporting Value, or MERV rating. MERV ratings range from 1 to 16, with higher numbers being more efficient at filtering small particles from the air. The standard for homes has been MERV 10 for a while, but that will soon be changing to a more efficient standard.
Essentially, the higher quality air you want in your home, the higher MERV rating you want on your filter. However, a higher MERV rating also means more frequent replacement and higher cost, so choose a rating that is appropriate for your family’s needs. If there is a history of allergies, or you live in an area with poor air quality, you may want a MERV 14 filter. If not, you may be fine with a MERV 11 or 12.
High efficiency filters may need to be changed as often as every month, whereas less efficient ones will be closer to that three month range. No matter what kind of filter you are using, you will have to change it more often if you live in a particularly dusty area, as well as in the summer months when the AC unit is being used more.
Tags: AC Filters, Buckhead, Canton, Indoor Air Quality, Mableton, Paulding County
Posted in Indoor Air Quality | Comments Off
Friday, September 9th, 2011
Maintaining your Townlake home is important, but it must be done properly. Learn these common maintenance mistakes so you can avoid making them yourself.
- Forgoing an Annual HVAC Maintenance -Your home’s heating, ventilation and cooling (HVAC) system should be thoroughly inspected each year. This is vital to keeping your house comfortable and energy efficient.
- Improper smoke and/or carbon monoxide detector maintenance – Smoke and carbon monoxide (CO) detectors should not just be installed properly, but also maintained properly. Test them monthly and replace drained batteries immediately.
- Not checking for radon – Radon is a deadly odorless gas that can cause lung cancer. The EPA has extensive materials on the risks of radon and how to mitigate them.
- Ignoring manufacturer instructions – Not only instruction manuals are they important for proper installation of important equipment in your home, they also contain maintenance recommendations and schedules. Adhering to these instructions protects your investment in your home.
- Not replacing filters regularly – Speaking of regular maintenance, remember that the air filters in your furnace and air conditioning units need to be replaced regularly according to manufacturer recommendations.
- Procrastinating on minor leaks – Even the most minor leaks need to be repaired immediately. The water from a tiny leak can damage structural components and create a breeding ground for termites or hazardous mold.
- Not keeping gutters clean – Speaking of water damage, clogged gutters can overflow and cause problems in a hurry. Clean gutters and downspouts at the start of spring and regularly as needed.
- Insufficient cleaning (filters, ducts, vents, carpets, furnace room) – Keeping filters, vents and ductwork clean extends the life of your ventilation equipment and keeps energy costs down, as does vacuuming regularly and keeping your furnace room free of debris.
- Hasty measuring during repairs and renovations – The old saying goes, “measure twice, cut once.” Failing to measure twice when you are making repairs or renovations in your home can lead to a lot of frustration and waste of costly materials.
- Skimping on labor costs – Paying cheap rates for poor labor will cost more down the road when you have to hire another contractor to fix the first one’s mistakes.
There are other ways to err in home maintenance, but this list covers some of the more common doozies. In general, as long as you are careful, diligent and not afraid to call in professional help when needed, you will be just fine.
Tags: Air Conditioning Maintenance, Buckhead, Heating Maintenance, HVAC Maintenance, Paulding County, Townlake, White
Posted in Air Conditioning, Heating | Comments Off
Wednesday, August 31st, 2011
Imagine this – it’s a sweltering summer day in Vinings. The humidity outside is obscene, hitting you like a wall when you open the door. So, the only place you want to be is on the couch with the cool air conditioned air being blown across your face. Sounds pretty good doesn’t it? Now, imagine what happens when that cool conditioned air stops flowing.
A breakdown in your HVAC system is the absolute last thing you want to experience on a day where the mercury dings 90+ but it can happen, and the only way to ensure things don’t get out of hand is to take the following steps.
- Check Common Problems –While the system itself could be broken, make sure there are no other issues involved. Frequently, the electricity supply can be interrupted by a power surge or a tripped breaker. In both cases, you can usually get the system back online by yourself. However, you should call an electrician to inspect it as soon as possible.
- Does it Turn On – If the air conditioning system turns on and simply doesn’t provide enough cooling for your home, it is likely a problem in the unit. In this case, check other common problems. Clogged filters can severely reduce efficiency and if the system freezes over, it may stop providing enough cooling.
- Still Not Working? – If the system refuses to turn on and there are not clear problems that you can fix yourself, it’s time to call a professional. A professional HVAC contractor should be available almost any day of the week for emergency calls like this. Of course, in the middle of a heat wave or cold snap, it’s very likely that they may be booked up for a couple days. To avoid this happening, have routine maintenance done as often as recommended to avoid the possibility of being without cooling or heating indefinitely.
A good HVAC system is the only thing standing between you and discomfort, or worse, danger to your health. Don’t let the system go into such disrepair that you can’t use it at all.
Tags: Air Conditioning Repair, Kennesaw, Lost Mountain, Paulding County, Vinings
Posted in Air Conditioning | Comments Off
Friday, August 19th, 2011
The filters on your air conditioning unit in your Crabapple home are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.
Monthly Checks
So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.
Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.
Changing an AC Filter
If your filter is ready for a swap, here are some quick tips to get the job done:
- Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
- Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
- Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.
Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work.
Tags: Air Filtration, Bridgemill, Crabapple, Indoor Air Quality, Paulding County
Posted in Indoor Air Quality | Comments Off
Monday, July 18th, 2011
Many people like older homes, but at a certain point, the age of a home can be a bit of a turnoff. It’s not the architecture – old homes are magnificently built and tend to have more character in the woodwork and nooks and crannies than any new home. But, when you move beyond how impressive early 20th century (or earlier) architecture is, you might find a number of maintenance and upkeep issues that have only been made worse by the passage of time.
Common Problems to Watch For
As with a 50 year old home, materials are a big issue. You need to have your home tested for lead paint and asbestos – both things that can be incredibly dangerous for every resident, especially children. These are very likely to be a part of the home if it hasn’t been remodeled in the last 30 years. Retrofitting to cover them up or remove them will be an added expense.
Additionally, older homes have much greater ratios of ventilation. If insulation has not been added in the last 25 years to cover those vents and gaps, your home will be very drafty, which is uncomfortable in the winter and costly year round. Make sure to have your home pressure tested and sealed up as soon as possible.
Upgrades You Can Make
Electricity is another major issue in older homes. While most old homes have been owned multiple times and likely upgraded since they were built, occasionally you will run across a house with extremely old wiring. That might mean a low capacity panel box or single strand wiring. Either way, it’s unsafe and unstable – for modern appliances and electronics you’ll need to upgrade that wiring as soon as possible.
The same may be true for your plumbing. If the house has original plumbing and fixtures, not only will they be inefficient, they may be rusty or prone to leakage. Sewer lines in particular are expensive replacements if they decide to break. Make sure you have these thoroughly inspected before a purchase.
The Joy of an Older Home
Despite all of the potential problems an old home might offer, there are plenty of benefits. Established neighborhoods, solid construction, and the ability to alter your home however you want are all positives you can’t overlook when buying a home. Just make sure you’re fully aware of what you’re getting into. Even a well maintained old home may have some issues that you miss on your initial walkthrough – make sure your inspector is thorough.
Tags: Cherokee County, Euharlee, Paulding County, Roswell, West Cobb
Posted in Home Savings | Comments Off
Join Us Online