Posts Tagged ‘Sandy Springs’
Wednesday, April 25th, 2012
Ceiling fans really help people reduce their heating and cooling cost. They have the ability to reduce warm temperatures up to 7 degrees, while dramatically reducing air conditioning costs. During the winter months, ceiling fans can operate in reverse mode. Doing so will circulate warm air throughout the room by pushing it up toward the ceiling. Careful consideration should be given when buying a ceiling fan, because of the wide variety available.
Fan Size
The fan should not be too large or too small for your room. A rule of thumb is to have at least 7 feet of clearance from the floor to the fan. The blades and the nearest wall should be a minimum of two feet apart.
Fan Motors
For ceiling fans to operate with efficiency, the size of the motor and the ground motor windings must coincide with blade length. This will allow the fan to run without using a lot of energy and continuously without any problems. However, when the blades or motor are not balanced correctly, the fan will begin to vibrate even at lower speeds. The motors that come with outdoor fans are built to endure temperature changes and moisture.
Fan Blades
Fan blades come in a variety of sizes and shapes. Appearance however is secondary to choosing ones that will provide the best performance and stability. You also need to decide what blade pitch you want. A higher pitch equals greater air circulation at lower speeds. Blade pitches are available between 8 and 15 degrees.
Another thing to consider is fan mounts. There are three types: flush mount, down rod mount, and tri-mount. Down rods are suited for higher ceilings, flush mount is designed for lower ceilings, and the tri-mount provides the best circulation regardless of height.
For more helpful hints check us out on www.southairinc.com
Tags: Acworth, Air Conditioning, Alpharetta, Atlanta, Austell, Canton, Cartersville, Cherokee County, Cumberland, Dallas, East Cobb, Euharlee, Fulton County, Geothermal, Holly Springs, HVAC, Indoor Air Quality, Kennesaw, Kingston, Lost Mountain, Mableton, Marietta, Mars Hill, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Air Conditioning, Energy Savings, Gas Heaters, Geothermal, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Indoor Air Quality, Insulation, Maintenance Plan/Comfort Club | Comments Off
Tuesday, December 6th, 2011
Are you looking for inexpensive ways to save money on energy bills this winter? Now is a great time to tackle these home projects and each of them is very affordable.
1. Add weather stripping to your doors and windows. Keeping warm air from escaping and drafts from blowing in can make a 5% to 10% difference in your energy use.
2. Seal exposed ductwork in attics and basements. Check for gaps in seams and joints, holes, or other places where warm air can escape. Use high quality mastic, rather then silver or duct tape that won’t hold as well or be efficient. Experts say that as much as 20% of warm air can escape through leaky ducts, so this is a great way to save money!
3. Put an insulation blanket on your water heater. The water tank warms up 30 or 40 gallons of water and then it starts to cool off, wasting money. An insulating blanket will slow down the heat loss substantially.
4. Program your thermostat so that the system runs less when you are nott there. Let the temperature fall 10 degrees or so when the house is empty, and you can program it to warm back up before you get home
5. Run full loads of laundry instead of several small loads. You’ll reduce your water use and your overall electrical use.
6. Add insulation to the attic. In winter, heated air escapes through the ceiling into the attic and out of the house. In summer, the attic gets hot and that air pushes down into the house, causing the air conditioner to work harder. A layer of insulation (minimum R19) in the attic will help year-round.
7. Have your furnace or heat pump cleaned and tuned up for winter. A dirty furnace or heat pump coil can waste 20% or more of the energy it uses. Having your entire HVAC system serviced before winter is a cost that might pay you back very quickly.
These are very good ways to reduce energy use on a limited budget. They are easy to accomplish and you will notice immediate results — lower energy bills every month going forward!
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, Waleska, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heat Pump Systems, Heat Pumps, Heating, Home Savings, Insulation, Maintenance Plan/Comfort Club, Rebates & Tax Credits, Tax Credits, Trane, Winterizing | Comments Off
Wednesday, November 30th, 2011
Winter is coming fast, and it certainly doesn’t let us forget it! Blustery winds that chill through to your bones, iced up car windows, and snow days, this often means that the temperature outside has reached as low as 30 degrees or colder when wind chill is considered!
A large reason that we are able to live comfortably in this weather is because of a special appliance that is often tucked away in your house and not really considered on a daily basis: your furnace.
Furnaces consist of three major components: the burners, a draft inducer, and a heat exchanger. When you bump up your thermostat or it detects that the temperature of your house/building has dropped below its designated temperature, it send a signal to the furnace to ignite its burners.
After the burners are ignited, the draft inducer kicks into action, and sucks the hot gases from the burners towards the heat exchanger. A draft inducer looks similar to a cars turbocharger, and works in a similar manner also. While the hot gas is moved through the heat exchanger, the furnace also brings air from your house through the heat exchanger in order to warm it. If the draft inducer is dirty in any way, this could cause the unit from igniting or staying lit.
And there you have it! Now you understand the basics of how a furnace works. Always use a professional to carry out maintenance and repairs to keep it running at peak efficiency and safe for the whole family.
Tags: Acworth, Alpharetta, Atlanta, Austell, Big Creek, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Clarkdale, Cobb County, Crabapple, Cumberland, Dallas, East Cobb, Euharlee, Holly Springs, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Northpoint, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Townlake, Vinings, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Maintenance Plan/Comfort Club, Rebates & Tax Credits, Tax Credits, Trane, Uncategorized, Winterizing | Comments Off
Friday, November 18th, 2011
Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems
Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.
Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.
Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.
Tags: Acworth, Alpharetta, Atlanta, Austell, Bridgemill, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lake Arrowhead, Lost Mountain, Mableton, Marietta, Mars Hill, Milton, Mountain Park, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Taylorsville, Waleska, White, Woodstock
Posted in Gas Heaters, Heat Pumps, Maintenance Plan/Comfort Club, Trane | Comments Off
Monday, November 14th, 2011
When the heater starts to malfunction, many homeowners debate whether they should call for furnace repair or buy an upgraded system. There are pros and cons to each choice and every individual will have to do some research and thinking to decide for himself or herself. Reparation can be the ecologically sound thing to do — or not. Many appliances are designed to go kaput at a certain age and to be hauled away to the dump.
Purchasing a new system can be good for the planet due to increased energy efficiency. If a system is so old that it guzzles energy like a hungry monster, this will make a large carbon footprint on the earth. Using a minimum of energy will be best for the planet and best for a consumer’s wallet. Here are some things to think about:
- Maintenance: An ounce of preventative maintenance is worth a pound of repair. Want to keep that HVAC working seamlessly for many years to come? Then perform regular maintenance and servicing. Replace the filter every month like clockwork.
On a specific date, such as the first of each month or every full moon, take out the old dusty one and discard it. Slip the new one into place, you have just extended the life of your furnace. Having a service technician come in at the beginning of every season to perform service will be a wise step, too.
- How old is your heater? Ancient furnace systems that clunk, clank and guzzle may be hopelessly outdated. When this old dinosaur breaks down, it may be wise to give it a decent burial. If it’s only a few years old, however, it would be wiser to call the repair person out to fix it.
- Energy star products: The government has given the “energy star” label to a variety of green products that are proven to cut energy consumption by 10 to 15%. The average family spends a couple thousand dollars to heat their home each winter and this savings can accumulate quickly. Not only will the utility bills be lower, but the government offers tax breaks to homeowners who install energy star products.
- Your repair person: It’s smart to establish a relationship with a tech before a breakdown occurs. Having an annual seasonal service performed will be the perfect opportunity to get this business relationship cemented.
When the heater goes kaput, it may be wise to call for furnace repair or might just be a wakeup call to purchase a new system. Doing a bit of homework and comparison shopping will provide answers for making an informed decision. Always choose a licensed professional.
Tags: Acworth, Alpharetta, Austell, Buckhead, Canton, Cartersville, Cherokee County, Cobb County, Dallas, East Cobb, Euharlee, Holly Springs, HVAC, Kennesaw, Kingston, Lost Mountain, Marietta, Mars Hill, Milton, Paulding County, Powder Springs, Roswell, Sandy Springs, Smyrna, Townlake, Vinings, White, Woodstock
Posted in Energy Savings, Gas Heaters, Heating, Home Savings, Maintenance Plan/Comfort Club, Tax Credits, Trane | Comments Off
Wednesday, August 17th, 2011
If there’s one thing you can count on with a home comfort system, in Canton or anywhere, it’s that there will be higher energy bills in the summer and an increase in dust and debris in your ductwork. But, luckily the latter can be fixed with a few simple filtration upgrades in your home.
The Nature of a Forced Air System
When you flip the switch on your thermostat and your air conditioner or furnace turns on, it starts drawing air from inside your house, conditioning it to the right temperature, and then circulating it back into your rooms through an air handler and ductwork. Of course, a good system should have proper ventilation to circulate new air into the house, but let’s face it – no matter how much ventilation you have in your home, there will always be dust and debris from things like pets, plants and other common household items.
So, when the air gets circulated back through the ducts, all sorts of debris and sediment build up. That’s not to mention the possible presence of actual contaminants like bacteria or mold. Luckily, because of how your forced air system is built, these are not tough problems to deal with.
Installing the Right Filters
Filtration is incredibly important for adding the right level of protection to your home’s ductwork. Usually placed directly within your air handlers, whole house air filters are designed to capture particles as small as 0.3 microns (if you purchase a high quality HEPA filter). That pretty much covers all dust, sediment, pollen, dander and other common allergens.
There are a number of other upgrades you can make to capture just about everything you house spits into those ducts – from bacteria and viruses to smoke and other air pollutants, but at the very least a good filter system will save your lungs, cut back on duct cleaning costs and make it much easier to maintain your home’s air quality throughout the year.
To learn more about HEPA filters and the specific ratings offered in various products, here is a link to the EPA’s guide to home air cleaners. It has a handy breakdown of different types of filtration and what each filter grade can capture.
Tags: Air Filtration, Canton, Indoor Air Quality, Sandy Springs, Waleska
Posted in Indoor Air Quality | Comments Off
Wednesday, April 20th, 2011
Once you’ve decided that a heat pump really is the best option for your home, you’ll still have a lot of options to consider. There are actually quite a few types of heat pumps and they can vary considerably in terms of their energy efficiency and other available features.
For instance, you can choose to go with a heat pump with a one-speed, two-speed or multi-speed compressor. Single speed compressors are only capable of operating at full capacity. That means that they’ll certainly be able to keep your home warm, but they may be working harder than they need to at some points.
A two-speed or multi-speed compressor, on the other hand, can be adjusted to more appropriately fit the heating and cooling needs of the moment. There will certainly be times when you don’t need your heat pump to be going all out, and the ability to regulate this level of performance can benefit you in several ways.
It will allow you to maintain a more consistent indoor temperature to be sure, but it will also reduce the overall wear and tear on your heat pump over time. If your heat pump doesn’t have to run all out all of the time, it simply won’t wear out as fast, and that will save you both money and frustration in the long run. It’s also worth noting that heat pumps with two-speed or multi-speed compressors are more easily integrated into a zone control system if you have one in your home.
However, regardless of what type of compressor your heat pump has, you’ll also have to examine the various heat pump models available to determine what their actual energy efficiency ratings are. Each heat pump actually comes with two ratings, one for heating and one for cooling.
The heating season performance factor (HSPF) reflects the heat pump’s heating efficiency, while the seasonal energy efficiency ratio (SEER) is a measure of its cooling efficiency. The higher both of these numbers are, the higher the efficiency of the unit. But you don’t necessarily need both numbers to be as high as possible to get the best heat pump for your home.
If you’re going to be using the heat pump more for cooling than for heating because of the climate where you live, you’ll want to make sure the unit you get has as high a SEER as possible, but you won’t have to worry too much about the HSPF. But if you’re going to need more heating than cooling, you should pay more attention to the HSPF than the SEER.
Tags: Sandy Springs
Posted in Heat Pumps | Comments Off
Join Us Online