Posts Tagged ‘White’

Buying the Right Ceiling Fan

Wednesday, April 25th, 2012

Ceiling fans really help people reduce their heating and cooling cost. They have the ability to reduce warm temperatures up to 7 degrees, while dramatically reducing air conditioning costs. During the winter months, ceiling fans can operate in reverse mode. Doing so will circulate warm air throughout the room by pushing it up toward the ceiling. Careful consideration should be given when buying a ceiling fan, because of the wide variety available.

Fan Size

The fan should not be too large or too small for your room. A rule of thumb is to have at least 7 feet of clearance from the floor to the fan. The blades and the nearest wall should be a minimum of two feet apart.

Fan Motors

For ceiling fans to operate with efficiency, the size of the motor and the ground motor windings must coincide with blade length. This will allow the fan to run without using a lot of energy and continuously without any problems. However, when the blades or motor are not balanced correctly, the fan will begin to vibrate even at lower speeds. The motors that come with outdoor fans are built to endure temperature changes and moisture.

Fan Blades

Fan blades come in a variety of sizes and shapes. Appearance however is secondary to choosing ones that will provide the best performance and stability. You also need to decide what blade pitch you want. A higher pitch equals greater air circulation at lower speeds. Blade pitches are available between 8 and 15 degrees.

Another thing to consider is fan mounts. There are three types: flush mount, down rod mount, and tri-mount. Down rods are suited for higher ceilings, flush mount is designed for lower ceilings, and the tri-mount provides the best circulation regardless of height.

For more helpful hints check us out on www.southairinc.com

Winterizing Your Home on a Budget

Tuesday, December 6th, 2011

Are you looking for inexpensive ways to save money on energy bills this  winter? Now is a great time to tackle these home projects and each of them is very affordable.

1. Add weather stripping to your doors and windows. Keeping warm air from escaping and drafts from blowing in can make a 5% to 10% difference in your energy use.

2. Seal exposed ductwork in attics and basements. Check for gaps in seams and joints, holes, or other places where warm air can escape. Use high quality mastic, rather then silver or duct tape that won’t hold as well or be efficient. Experts say that as much as 20% of warm air can escape through leaky ducts, so this is a great way to save money!

3. Put an insulation blanket on your water heater. The water tank warms up 30 or 40 gallons of water and then it starts to cool off, wasting money. An insulating blanket will slow down the heat loss substantially.

4. Program your thermostat so that the system runs less when you are nott there. Let the temperature fall 10 degrees or so when the house is empty, and you can program it to warm back up before you get home

5. Run full loads of laundry instead of several small loads. You’ll reduce your water use and your overall electrical use.

6. Add insulation to the attic. In winter, heated air escapes through the ceiling into the attic and out of the house. In summer, the attic gets hot and that air pushes down into the house, causing the air conditioner to work harder. A layer of insulation (minimum R19) in the attic will help year-round.

7. Have your furnace or heat pump cleaned and tuned up for winter. A dirty furnace or heat pump coil can waste 20% or more of the energy it uses. Having your entire HVAC system serviced before winter is a cost that might pay you back very quickly.

These are very good ways to reduce energy use on a limited budget. They are easy to accomplish and you will notice immediate results — lower energy bills every month going forward!

The Most Important Part of Your Home — Your Furnace:

Wednesday, November 30th, 2011

Winter is coming fast, and it certainly doesn’t let us forget it! Blustery winds that chill through to your bones, iced up car windows, and snow days, this often means that the temperature outside has reached as low as 30 degrees or colder when wind chill is considered!

A large reason that we are able to live comfortably in this weather is because of a special appliance that is often tucked away in your house and not really considered on a daily basis: your furnace.

Furnaces consist of three major components: the burners, a draft inducer, and a heat exchanger. When you bump up your thermostat or it detects that the temperature of your house/building has dropped below its designated temperature, it send a signal to the furnace to ignite its burners.

After the burners are ignited, the draft inducer kicks into action, and sucks the hot gases from the burners towards the heat exchanger. A draft inducer looks similar to a cars turbocharger, and works in a similar manner also. While the hot gas is moved through the heat exchanger, the furnace also brings air from your house through the heat exchanger in order to warm it. If the draft inducer is dirty in any way, this could cause the unit from igniting or staying lit.

And there you have it! Now you understand the basics of how a furnace works. Always use a professional to carry out maintenance and repairs to keep it running at peak efficiency and safe for the whole family.

Feeling a Little Chilly?

Friday, November 18th, 2011

Your home is a haven for you and your family. You do all you can to keep it comfortable and safe. If you live in a cold climate, you know how important it is to keep your home warm during the cold months. Being unsure whether your heating system will work properly through the winter can cause serious worry for a homeowner. Hiring a professional home heating service to do a yearly check-up is a great way to catch problems and make repairs before they turn into serious problems

Heating contractors have the expertise and training to handle any size of repair, and they deal with furnace issues and ductwork on a regular basis. They will evaluate your needs and give you an estimate for the repair before they begin it. You want to contract with professionals who have the skills and abilities to detect and repair problems to your heating and air conditioning system. Because they are experienced, they have worked on many different types of units, which give them important knowledge that the average homeowner simply doesn’t have.

Reliable heating contractors work hard to provide affordable bids quickly so that you can have them do the work that gets you back to status quo. It is a good idea to locate a contractor before you have a problem so that you will know who to call if an emergency were to occur. It is a good idea to have a company come out for a basic service call so you can see how easy they are to work with and how well they do their job. This way if problems arise later you know you have someone to call that you can trust and knows your system. If you try to fix a problem with your heating or air conditioning system on your own, you could actually make it worse and cause your home to be without heat for a longer period of time.

Choosing professional heating contractors will keep this from happening. Be sure when you call for your emergency that you accurately describe the problem with your system so that your heating contractors will have a better idea of where to start. This may reduce the total time they must spend and can save you money, since they get paid by the hour.

Furnace Repair or Replace? A question from Marietta

Monday, November 14th, 2011

When the heater starts to malfunction, many homeowners debate whether they should call for furnace repair or buy an upgraded system. There are pros and cons to each choice and every individual will have to do some research and thinking to decide for himself or herself. Reparation can be the ecologically sound thing to do — or not. Many appliances are designed to go kaput at a certain age and to be hauled away to the dump.

Purchasing a new system can be good for the planet due to increased energy efficiency. If a system is so old that it guzzles energy like a hungry monster, this will make a large carbon footprint on the earth. Using a minimum of energy will be best for the planet and best for a consumer’s wallet. Here are some things to think about:

- Maintenance: An ounce of preventative maintenance is worth a pound of repair. Want to keep that HVAC working seamlessly for many years to come? Then perform regular maintenance and servicing. Replace the filter every month like clockwork.

On a specific date, such as the first of each month or every full moon, take out the old dusty one and discard it. Slip the new one into place, you have just extended the life of your furnace. Having a service technician come in at the beginning of every season to perform service will be a wise step, too.

- How old is your heater? Ancient furnace systems that clunk, clank and guzzle may be hopelessly outdated. When this old dinosaur breaks down, it may be wise to give it a decent burial. If it’s only a few years old, however, it would be wiser to call the repair person out to fix it.

- Energy star products: The government has given the “energy star” label to a variety of green products that are proven to cut energy consumption by 10 to 15%. The average family spends a couple thousand dollars to heat their home each winter and this savings can accumulate quickly. Not only will the utility bills be lower, but the government offers tax breaks to homeowners who install energy star products.

- Your repair person: It’s smart to establish a relationship with a tech before a breakdown occurs. Having an annual seasonal service performed will be the perfect opportunity to get this business relationship cemented.

When the heater goes kaput, it may be wise to call for furnace repair or might just be a wakeup call to purchase a new system. Doing a bit of homework and comparison shopping will provide answers for making an informed decision. Always choose a licensed professional.

Big Savings on New Trane Comfort Systems

Monday, September 19th, 2011

Summer might be nearly over, but we still have some great deals for you! Fall is a great time to start thinking about replacing you old comfort system, and to get your home ready for the colder months to come. Even if your older unit is still technically functioning, newer HVAC equipment is much more energy efficient and is definitely worth the investment. Especially when you can get a deal like this one:  purchase a qualifying Trane XLi System and Trane Comfort Control and receive up to a $1250 Instant Rebate OR 36 months no interest OR 5.9% APR financing!

Give us a call today for details, and don’t delay! Offer expires 10/31/2011.

The Top 10 Mistakes Homeowners Make with Home Maintenance: A Tip From Townlake

Friday, September 9th, 2011

Maintaining your Townlake home is important, but it must be done properly. Learn these common maintenance mistakes so you can avoid making them yourself.

  1. Forgoing an Annual HVAC Maintenance -Your home’s heating, ventilation and cooling (HVAC) system should be thoroughly inspected each year. This is vital to keeping your house comfortable and energy efficient.
  2. Improper smoke and/or carbon monoxide detector maintenance – Smoke and carbon monoxide (CO) detectors should not just be installed properly, but also maintained properly. Test them monthly and replace drained batteries immediately.
  3. Not checking for radon – Radon is a deadly odorless gas that can cause lung cancer. The EPA has extensive materials on the risks of radon and how to mitigate them.
  4. Ignoring manufacturer instructions – Not only instruction manuals are they important for proper installation of important equipment in your home, they also contain maintenance recommendations and schedules. Adhering to these instructions protects your investment in your home.
  5. Not replacing filters regularly – Speaking of regular maintenance, remember that the air filters in your furnace and air conditioning units need to be replaced regularly according to manufacturer recommendations.
  6. Procrastinating on minor leaks – Even the most minor leaks need to be repaired immediately. The water from a tiny leak can damage structural components and create a breeding ground for termites or hazardous mold.
  7. Not keeping gutters clean – Speaking of water damage, clogged gutters can overflow and cause problems in a hurry. Clean gutters and downspouts at the start of spring and regularly as needed.
  8. Insufficient cleaning (filters, ducts, vents, carpets, furnace room) – Keeping filters, vents and ductwork clean extends the life of your ventilation equipment and keeps energy costs down, as does vacuuming regularly and keeping your furnace room free of debris.
  9. Hasty measuring during repairs and renovations – The old saying goes, “measure twice, cut once.” Failing to measure twice when you are making repairs or renovations in your home can lead to a lot of frustration and waste of costly materials.
  10. Skimping on labor costs – Paying cheap rates for poor labor will cost more down the road when you have to hire another contractor to fix the first one’s mistakes.

There are other ways to err in home maintenance, but this list covers some of the more common doozies. In general, as long as you are careful, diligent and not afraid to call in professional help when needed, you will be just fine.

What to Look for when a Home is 10 Years Old

Friday, July 22nd, 2011

A ten year old home is likely to be in great condition, presuming the previous owner(s) treated it well. But, there are some things you should watch out for that can arise in newer constructions, even if they were treated well.

Poor Craftsmanship

While it is possible for a 100 year old home to have poorly crafted parts, it’s highly unlikely if the house is still intact and is being sold this long after it was built. Newer homes, however, wouldn’t show signs of cheap materials or shoddy work until a bit later in their life. That’s why it is important to pay for a thorough inspection of the property as soon as possible – definitely before it is purchased and possibly again afterwards to check for possible improvements.

Specific things you should check for include roofing, your heating and cooling systems, the insulation and the drywall used. Especially in freshly renovated or built houses it’s impossible to be sure a home was built with the highest standards of modern craftsmanship.

Proper Maintenance

For a home that is only 10 years old, there is a good chance you can get the original records for the heating and cooling system, any appliances in the home and all maintenance performed on them since their installation. If not, don’t fret – a good technician will be able to easily check the status of a piece during an inspection.

You should also check to find out the last time the sewer lines and plumbing were inspected. Owners of new homes often forget to have these things checked because they never deal directly with the contractors after the home is bought. To avoid falling into that trap, you should make sure the maintenance plans have been followed carefully and kept up with since the system was installed.

Overall, if your new home is only 10 years old, you are likely in a very good place. The home will be in good condition, the parts will be new, and your heating and cooling system should be efficient. Original parts installed during construction may need to be replaced, but otherwise, if everything else checks out, you can count on having a comfortable, wonderful place to live for some years to come.

What to Look for when a Home is 50 Years Old

Wednesday, July 20th, 2011

Buying an older home can be a very rewarding experience. The architecture is unique, the rooms have character, and it feels more like a home than a brand new, prefabricated home that was built in a development. But, there are quite a few things to keep in mind when buying a house that is 50 years old or more – from what construction materials were used to how it was maintained for the last 50 years.

Possible Safety Issues

Because the dangers of lead paint and asbestos were not yet understood in the 1950s and ‘60s, you should always have your home thoroughly inspected for both before buying. The risk of either being in a 50 year old home is high unless someone has gone to the trouble of removing them in a remodel. Even then, older insulation, hidden paint layers or other construction decisions can be potentially dangerous, especially if you have children.

Not that you should avoid an older home solely for this reason. There are plenty of homes that have been made livable again with a little hard work – it’s just important that you know about it before investing so much money.

Maintenance Issues

Another thing to consider is the upkeep of the house. A 50 year old home has been lived in for many years. That means there have been multiple furnaces and air conditioners, replacements of windows, new roofs put in and much more. How well and how often those things were done will play a major role in determining how good of condition the house is in.

If you buy a 50 year old home and the roof and furnace need to be replaced, that’s another 5 figure investment to update your living space.

Other things you should be on the lookout for are old appliances like your refrigerator and stove, as well as the gas lines and electrical. Your panel box may be outdated, as may your electrical lines and outlets. These are all things that get updated eventually, but a home built 50 years ago would be both unsafe and outdated by today’s standards.

More than anything, when buying an old home, the most important thing is the condition. Age has very little to do with how livable a home is. Some people live comfortably in homes that are 200 years old. Others must have 10 year old homes completely remodeled. It’s all about how the home is maintained and cared for.

Space Heating vs. an Upgrade to Your Heating System

Wednesday, March 30th, 2011

If your heating system isn’t really cutting it anymore, it may be time to take a step back and consider what your options are. After all, upgrading to an entirely new heating system is a big investment and a large project that will likely disrupt your life at least for a short period of time. However, under certain circumstances it’s the best alternative out there.

One option to consider when you’re unhappy with your home heating situation is supplementing your central heating system with space heaters. These are generally inexpensive and can be placed virtually anywhere in your house or taken with you from one room to another.

Especially if there is a small part of your home that your heating system just doesn’t seem to reach or that you want to keep a bit warmer than the rest of the house, space heaters can be an excellent option. They’re small, safe and portable and can easily keep a smaller portion of your home or room cozy and warm.

However, you’ll have to take into account the operating costs of a space heater as well as the initial investment when you’re trying to evaluate the overall cost effectiveness of this option. Most space heaters run on electricity, which often costs considerably more than oil or natural gas. If your home heating system runs on electricity anyway, this might not be so much of a factor. But if you have an oil or gas furnace, you could wind up paying significantly more to run space heaters as supplemental heat over time.

Also, it’s worth considering that new home heating systems are likely much more energy efficient than the system you currently have in place. Although the initial installation cost can be pretty substantial, you’ll wind up saving a very large amount on your monthly heating bills by upgrading to a newer model.

Plus, you’ll be getting a system that should be able to satisfactorily heat your home without the need for space heaters or other supplemental heat sources. This translates into a pretty hefty savings over time and that’s something you’ll certainly have to take into consideration when you’re evaluating your options.